IWI X-95 Geissele Super Sabra Trigger pack Installation problems

bravo2058

bravo2058

Member
EE Expired
Rating - 100%
65   0   0
I purchased a Geissele Super Sabra Trigger pack and Lightening Bow trigger. The trigger was pretty simply to install however I cannot get the Super Sabra trigger pack installed. Cannot get the trigger pack door to close and the holes to line up. I can get one pin in however cannot get the other lined up or the trigger pack door to close.
Does anybody have any suggestions?
 
bravo2058 said:
I purchased a Geissele Super Sabra Trigger pack and Lightening Bow trigger. The trigger was pretty simply to install however I cannot get the Super Sabra trigger pack installed. Cannot get the trigger pack door to close and the holes to line up. I can get one pin in however cannot get the other lined up or the trigger pack door to close.
Does anybody have any suggestions?
Click to expand...

Where do you find the trigger pack if you don’t mind me asking?
 
Try it with your bolt carrier group removed.

But don’t get excited and pull the trigger before you put the BCG back in: it’s a real pain to fish out if the hammer is forward inside the gun
 
TV-PressPass said:
Try it with your bolt carrier group removed.

But don’t get excited and pull the trigger before you put the BCG back in: it’s a real pain to fish out if the hammer is forward inside the gun
Click to expand...

And if ubdid, a giant screwdriver handle thru the front can reset it.

Ask me how i know
 
Lube the pins and use an awl or center punch to help align the holes, before trying to push the pins through. Mine is very tight and takes lube, some wiggling and an something to align the holes before I can get it in
 
You must log in or register to reply here.
Back
Top Bottom