JC Higgins model 50's

mbogo3

CGN Ultra frequent flyer
Rating - 100%
87   0   0
Picked up a JC Higgins model 50 in 30-06 a couple months back and got a matching one in .270 today. They need some TLC /stock refinishing and sight replacement but nothing too difficult.Will likely give them to the two eldest boys for Christmas.They are commercial FN actions with High Standard made chrome lined barrels and Fajen or Sile walnut stocks! Harold
 
Last edited:
Harold,
Cool. The FN action is definitely one of my favourite too. Which version of the action is it? Supreme (300) or "commercial" (200)?
 
P3230401.jpg
P3230399.jpg
P3230404.jpg
The action has an odd two piece trigger system and here's a pic of the before stock someone just varnished. Harold
 
I'm refinishing one for a buddy right now,it has the original j.C.Higgins scope on it ( what a piece of crap) but a neat part of history & family tradtion for him. It has slayed an awful lot of elk over the years.its a model 50 in 30'06.
 
I bought one in .270 at Wholesale Sports years ago for 250. No doubt someone had foolishly traded it in on some new rifle designed for cheap and easy production, and left behind one of the best quality rifles ever made. Mine was well used over the years before I got it, but still groups right around an inch with 130gr Accubonds, and has one of the slickest 98 actions I've ever felt.

It carries and points nicely and was used to take a nice double main beam whitetail several years ago. I just put a new Leupold on it a couple of weeks ago and hope to use it this year for whitetail again.
 
I was looking at a model 50 chambered in .30-06 for $299.99, is this a good price?

Friend,
This is less than what one will pay for the action itself, so even if you have to restock it or even rebarrel, it's still a good buy. The FN actions have gone a long way up in value since some time. After being forgotten for year, finally, they are re-recognized for their natural qualities - thanks to low workmanship and plastic-age look of the newest rifle production. All their post WWII actions (except, maybe the very early ones, with the thumb cut-out) are made of modern alloyed steel.

As a sidenote, personally, I am always a bit "suspicious" to say the least, with these internet "references" such as Chuck Hawks' site, because usually, they do not give any references of their "finds". More than one time I had discussions with Chuck about wrongly reported informations and he just couldn't reference his "work". In the article offered above, the writer refers to "experts" but don't name or reference them, which, to me, brings a lot of suspicion on the research work.
 
The same guy I got the .270 from has a JC Higgins 51L with High Standard chromed barrel and HVA action in 30-06 but his price is overboard at $775 IMO
 
Friend,
This is less than what one will pay for the action itself, so even if you have to restock it or even re barrel, it's still a good buy. The FN actions have gone a long way up in value since some time. After being forgotten for year, finally, they are re-recognized for their natural qualities - thanks to low workmanship and plastic-age look of the newest rifle production. All their post WWII actions (except, maybe the very early ones, with the thumb cut-out) are made of modern alloyed steel.

As a side note, personally, I am always a bit "suspicious" to say the least, with these internet "references" such as Chuck Hawks' site, because usually, they do not give any references of their "finds". More than one time I had discussions with Chuck about wrongly reported information and he just couldn't reference his "work". In the article offered above, the writer refers to "experts" but don't name or reference them, which, to me, brings a lot of suspicion on the research work.[/QUOTE

Chuck's articles are taken with a grain of salt by me, just like anything else on the internet including this site. It was referenced because I felt they gave a decent overview of the rifle.

After hunting with a model 50 for over 20 years I can say it was a decent rifle, but by no means a tack driver. The balance was fair and it carried a good weight (which is something that I feel is important), although the barrel is quite thin and heats up after one shot. Because of this I found it hard to make good 3 shot groups with it. Shooting one shot then let it cool completely... shoot again and doing this for consistent grouping the rifle still wasn't terribly accurate. After bedding it, the groups tightened up by half, but still not accurate enough to make humane shots further than 200 yards.
The walnut was nice, and the action was ok (but seriously I can't buy into the hype about those old Mauser actions), but jammed when feeding occasionally. Ejection was always flawless, trigger wasn't great...

It was only after purchasing a few modern rifles that I could see the shortcomings with the old model 50. For a rifle made in the 50's I think it was good, but compared to modern offerings it palls. That being said, I think they're a great classic rifle that's worth $500 (in pristine condition), or less.

Steve.30-06: I know where you're seeing the one for 300 bucks and was going to have a look at it when I passed through there last hunting season (for curiosity's sake). Take the drive up today and have a look if you like, but if you bring it home don't have too high of expectations. It's a modest 1950's rifle. Now, if you wanted to spend twice that much, I know where there's a Sako for sale which in my opinion would be a better set up....:stirthepot2:
 
I plan on putting Timneys in both and would be shocked if it won't shoot MOA or better with handloads.I don't think you would want to set up your good china at past 200 yards and expect any left to take home........will post targets after stock refinishing.The standard Burris one piece base fits the holes perfectly on the 06 but the .270 is different.Talley makes the correct bases or I can go with a two piece base and drill + tap an extra hole for the rear mt. The diameter of the barrel at the muzzle is .543 so it's not a pencil weight.Harold
 
Last edited:
Kids nowadays think a good gun has to be SS and have a synthetic stock! No appreciation of walnut and old world craftsmanship..........I'm working on it..........Harold
 
If the rifle you're referring to is in Campbell River, it has some issues with off-centre sight-mount holes and one additional hole drilled over the chamber as I recall. If that doesn't bother you then $299 is a decent price. Tradex has some FN98 Commercial's priced similarly with side-mount holes but they are easier to plug than unwanted holes on top of the receiver.
 
Blued and wood all the way for this guy (leather slings too). Over the years I re-finished my old model 50 twice, and was always pleased with the results. Synthetic stocks always remind me of silicone breast implants: they look nice, but when you touch them they're just not the same.... =]
 
If the rifle you're referring to is in Campbell River, it has some issues with off-centre sight-mount holes and one additional hole drilled over the chamber as I recall. If that doesn't bother you then $299 is a decent price. Tradex has some FN98 Commercial's priced similarly with side-mount holes but they are easier to plug than unwanted holes on top of the receiver.

That was the one I seen too, might just have saved him a drive... Still recommend the Sako. Tradex had a couple of L61R's on there as well.
 
Kids nowadays think a good gun has to be SS and have a synthetic stock! No appreciation of walnut and old world craftsmanship..........I'm working on it..........Harold

Me too. Oldworld Craftsmanship is the character most so-called modern firearms lacks. The only thing they have done better than Mauser, is to short-cut the machining operations. But by doing that, most also miss the esthetic side of a fiream.
 
The best combination is old world craftsmanship (which to me means attention to detail and use of quality materials), with new world technology and know how. For that I had to part with the Higgins and two other firearms to afford the replacement.
 
Back
Top Bottom