My oval bore gun makes 1/2 turn in the length of the barrels which I think from memory are around 26". In other words about 1 turn in 52" and it does stabilize the bullets. I think I used a second hand Lee mold for a 58 mini ball as the beginning for making the paradox slug mold and besides boring out the main body of the mold, I also changed the base plug. I think that my limited success in accuracy so far is a reflection on my loading and I am hoping that increasing the diameter of the slug a bit will improve accuracy. I might also try paper patching first and see if that improves things. Wrapping with Teflon tape did help but I did not want to use it because it was not traditional or at least I am sure that Jim Corbet never used it :>)
cheers mooncoon
cheers mooncoon


















































