K31 Diopter and Scope Mount Group Buy

[diopter]

I'm putting together another one.
Prices will depend on total amount of the purchase.

Let me know if you're interested and I'll keep you in the loop for information and prices as they become available.

P.M. me with your home email.

 

[diopter]

Links to pictures

Clamp on scope mount:
http://www.swissrifles.com/~swiss-sights/#co

Type P diopter:
http://www.swissrifles.com/~swiss-sights/#diopt

Typre II(c) diopter wich includes the clamp-on scope mount:
http://www.swissrifles.com/~swiss-sights/type2p/

Clamp on scope mount.
No rings included. Needs 3/8" dovetail rings in whatever height best suits the size of the scope you end up using.

First Model P clamp-on diopter and front sight.
Includes either an Anschütz or a Gehmann adjustable rear iris diopter(no filters).
Uses standard Anschütz metric thread, so the sky is the limit if you want to change to higher models later. Front sight usually has one 3.0 to 3.2mm ring aperture insert of standard 18mm size as used by most Anschütz equipment.

New PII(c) clamp-on diopter(includes clamp-on scope mount).
Latest model diopter which clamps to the scope mount, and the front sight.
Includes either an Anschütz or a Gehmann adjustable rear iris diopter(no filters).
Uses standard Anschütz metric thread, so the sky is the limit if you want to change to higher models later.

As soon as I get word of the pricing with a large enough order, I will inform everyone who emails me at home of their price before shipping.

 

[diopter]

Btt:

BTT

Just in case any has forgotten about it.

 

[BadgerDog]

I'm in.............

Regards,
Badger

 

[diopter]

btt

BTT

Need more interest before it becomes viable to cover expenses.
Spring IS n the way, but I can't help with your credit card bills from christmas. hoping to get an order together for March-April time frame.

 

[Orvis]

I interested......

 

[Hitzy]

You already have my order

 

[tiriaq]

Mine, too.

 

[Skippy]

Can't you give us a rough estimate? What do they cost if you were just to buy one without the group discount?

 

[Hitzy]

Can't you give us a rough estimate? What do they cost if you were just to buy one without the group discount?

About $350US for the Type Pii(c) diopter/scope mount set.
http://www.grafs.com/fc/search.php?o=2&p=&q=swiss&v=&s=

 

[diopter]

For estament of prices,

email me at here:
carlos.da.silva@sympatico.ca

 

[svt-40]

Is clamp on mount for the lefties only?

 

[Hitzy]

Is clamp on mount for the lefties only?

It works fine for right handed shooters as well.

 

[svt-40]

Does it mount onto the left side of the receiver too?

 

[Hitzy]

Lots of info on the mount and diopters on SRDC

 

[diopter]

All of the sight options can be used by either left hand or right hand shooters.
If you are worried about any of them being off-center from the bore, forget about it, the offset is not a problem in any manner what so ever.

 

[svt-40]

All I want is to see a picture of the right handed clamp on mount. The site that you pointed to has a left handed mount. That is all... This:

All of the sight options can be used by either left hand or right hand shooters.

does not answer my question as it is not clear whether you are suggesting that a right handed one can successfully use the clamp on mount on the right side of the rifle, or that there is a mount for the left side.

 

[diopter]

Drill & tap Vs Clamp-on mount.

The driill and tap mount is the only one they make that goes on the left hand side of the receiver. Much more work to install properly.

All the clamp-on sight options mount on the right hand side of the receiver into the slot cut.

PM me with your email and I'll send some pictures.

 

[diopter]

Btt

BTT Will try to finalize by end of march for April shipment.

 

[diopter]

Btt

Still need one or two more to keep costs down.
I'll be at Connaught pistol range tonight and Saturday.

Email or PM me if interested.

Cannuck Dollar is doing fairly well against US at the moment.