Kel-Tek Sub 2000 gen 2 scoping options

[guess_kto]

Since it folds over the top, what are the option for optics? Is there a solution that would avoid taking off optics every time you fold the gun?

 

[Daver_II]

Gen 1 or gen 2?

I am not sure if the red lion fore-end fits the gen 2.


Otherwise, the red lion fore-end is your best option.

 

[Black_Valkyrie]

Keltec sells a single rail section for a gen 1 that fits under the fore end. Reliable gun can get it. I mounted a Stream light laser / combo on mine. You don't need a scope. Between a laser and the iron sites you are more than fine.

 

[Black_Valkyrie]

Keltec sells a single rail section for a gen 1 that fits under the fore end. Reliable gun can get it. I mounted a Stream light laser / combo on mine. You don't need a scope. Between a laser and the iron sites you are more than fine.

 

[Can-down]

If your gun has a top or side rail you can use an offset adapter to mount a small red dot.

 

[Truck Norris]

I mounted a 45 degree offset to mine and mounted a Bushnell TRS-25. It will fold but not perfectly flat and lock .

 

[Black_Valkyrie]

You're over thinking it.

 

[WiredWeasel]

Red Lion Precision sells an interesting quad rail design that you can rotate when you fold up theSub 2000. Im not sure if they are shipping to Canada anymore though.

 

[Can-down]

Keltec sells a single rail section for a gen 1 that fits under the fore end. Reliable gun can get it. I mounted a Stream light laser / combo on mine. You don't need a scope. Between a laser and the iron sites you are more than fine.

Specially if you replace the plastic blade and plastic nuts with a nice fiber optic blade and some metal nuts.

 

[guess_kto]

If your gun has a top or side rail you can use an offset adapter to mount a small red dot.

I ordered this one just to see how it would look like and work. I also ordered inexpensive laser just to test it. Waiting for mail now.

 

[Black_Valkyrie]

Specially if you replace the plastic blade and plastic nuts with a nice fiber optic blade and some metal nuts.

Mine is dead accurate. No need to replace. Just site it in.

 

[Can-down]

Mine is dead accurate. No need to replace. Just site it in.

I prefer a round bead ,glowing fiber optic type front sight over the long orange plastic blade.
The fact it's metal is just a bonus.
No need to reply......

 

[Can-down]

Mine is dead accurate. No need to replace. Just site it in.

I didn't say the gun doesn't work out of the box...... I said the front sight blade and adjustment nuts can be improved
I prefer a round bead ,glowing fiber optic type front sight over the long orange plastic blade.
The fact it's metal is just a bonus.
No need to reply......

 

[Black_Valkyrie]

A scope is a waste of time and money on this firearm.

 

[Can-down]

I agree no point in mounting a scope.
Now a nice little red dot on the other hand....... pourquoi pas!

 

[Black_Valkyrie]

Nowhere to mount a red dot either. Just get a laser and be done with it.

 

[windage]

A 45 degree offset with a Redfield Accelerator Reflex red dot is the perfect setup that still allows the gun to be folded and locked in place.

 

[9x19p]

You're over thinking it.

Mine is dead accurate. No need to replace. Just site it in.

A scope is a waste of time and money on this firearm.

Holy fvck dude, stfu!
Who are you to make a call on what someone else wants or needs? Nobody.

Sorry op, don't mean to sidetrack.
I did see a sweet setup where a guy mounted his scope to a door hinge. It was awesome. .

Nowhere to mount a red dot either. Just get a laser and be done with it.