Kidd & Ruger Shipment Just Cleared into Dlask Arms Corp.

Dlask Arms

Dlask Arms

CGN Ultra frequent flyer
Business Member
Rating - 100%
51   0   0
Location
Delta, BC
We have just received a small shipment of both Kidd and Ruger products. The Ruger BX trigger packs are now back in stock. For Kidd we got single stage packs, 2-stage packs with straight blade triggers, buffers, extractors, guide rods, extended mag releases for both the Ruger factory packs and the Kidd packs that came stock with the low or medium release. Also got some black Ultralight Barrels in.
 
Oooh. This is good!
Do you ever take orders for specific kidd items? Ive been wanting some kidd stuff but have never came across exactly what i want on this side of the border
 
Is the only option 20$ flat rate shipping?
I’m after a recoil buffer and auto bolt release.....tiny tiny little things.
 
I didn't want to start a new thread just to say congratulations. I would say you now have the most efficient order processing system in the business. I actually received my order the next day with Canada Post. Absolutely mind blowing. Well done .
 
Tko47 said:
Is the only option 20$ flat rate shipping?
I’m after a recoil buffer and auto bolt release.....tiny tiny little things.
Click to expand...

Sorry but it is what it is for shipping. We will only ship Canada Post with tracking and they have a minimum charge regardless if you send a letter or a small box up to .75 kg. The days of 'Just put it in an envelope' for us are over. Too many times in the past customers have received damaged parts (which they expect us to replace), torn envelopes with missing parts (which they expect us to replace) or the envelope gets lost or stolen (which they expect us to replace). We just cannot be the defacto replacement department for CP's crappy service anymore, sorry, margins in this industry are slim enough these days and will get a whole lot slimmer if the Lib-Tards get a majority in the next election.
 
I just bought a DAR22 with 0MOA integrated rail and a Kidd Ultralight
Seems like the barrel is too wide to fit all the way in. The barrel begins to make contact with the slope underneath the rail while the is still 1/8 Inch left to go? Are these parts compatible?
 
@captainamazing. The dlask receiver I had did the same thing. I could by no means get that last 1/8” barrel into the receiver but the headspace and extraction was fine. It fired all ammo just as good as my other builds. I got used to that tiny gap you speak of. Should be fine
 
Solution: pour boiling water on it until i could loosen it. Whacked the receiver with a deadblow hammer buffered by a piece of softwood. I spun the barrel on a lathe and put some emery cloth on the barrel chamer to take it down by .001-2. Put it back together and it seated very tight and perfect. Wish i knew the fitting was going to be a part of this
 
You must log in or register to reply here.
Back
Top Bottom