KKM Barrels

Thanks, the "first" thing that comes to mind is "how much fitting" did you need/do and how was accuracy? was it "noticeably" improved?
Did you change out the barrel in order to shoot "reloads" specifically lead? or did you have another reason? Thanks bud!
 
I had two of them (KKM) and I find they are the best of the "drop in" barrels I have used. No fitting is required with these, but they do have tighter tolerances than the Glock factory barrel. I much prefer them to the Lone Wolf barrels which sometimes have too tight chambers and the hideous wolf logo. In my KKM barrels, I had about 5% of my reloads which were too big to chamber in the slightly tighter KKM chamber. My Lone Wolf barrel would not chamber 30% of the same reloads. Stock Glock barrel would eat 100% due to its generous chamber size.

I found mine to be slightly more accurate than the stock Glock barrel. However, unless you want to shoot lead, I would stick with the stock barrel.
 
mildot said:
Thanks, the "first" thing that comes to mind is "how much fitting" did you need/do and how was accuracy? was it "noticeably" improved?
Did you change out the barrel in order to shoot "reloads" specifically lead? or did you have another reason? Thanks bud!
Click to expand...

It was a drop in with no issues and accuracy was on par with the factory barrel. I got it as a caliber conversion (9 to .40)...
 
Do you know where to get them in Canada? I sure as hell don't. I want to get a .357 sig barrel for a M&P Pro.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom