Kodiak Defense WR762 aka Kodiak CZ858 type

Status
Not open for further replies.
For all of you that would like their CZ 858 part kit built onto a complete rifle I need your kit here, at Wolverine Supplies by the 27th Oct. Target date for completion will be the end of Nov. All packages must be marked "Kodiak CZ 858 Build" on the outside. I will confirm price this week.

For all of you that would like a new stripped Kodiak CZ 858 receiver we can supply to special order only, they will have a unique serial number range as obviously they will carry no warranty as we have no control how they are assembled. I will confirm price this week.
 
Mr Wolverine said:
For all of you that would like their CZ 858 part kit built onto a complete rifle I need your kit here, at Wolverine Supplies by the 27th Oct. Target date for completion will be the end of Nov. All packages must be marked "Kodiak CZ 858 Build" on the outside. I will confirm price this week.

For all of you that would like a new stripped Kodiak CZ 858 receiver we can supply to special order only, they will have a unique serial number range as obviously they will carry no warranty as we have no control how they are assembled. I will confirm price this week.
Click to expand...

Damn,worst timing ever....please tell me this won’t be a one time thing....

unless you can do lay away on the full rifle for me after I’ve sent my parts kit,there’s no way I can afford this right now.
 
Mr Wolverine said:
For all of you that would like their CZ 858 part kit built onto a complete rifle I need your kit here, at Wolverine Supplies by the 27th Oct. Target date for completion will be the end of Nov. All packages must be marked "Kodiak CZ 858 Build" on the outside. I will confirm price this week.

For all of you that would like a new stripped Kodiak CZ 858 receiver we can supply to special order only, they will have a unique serial number range as obviously they will carry no warranty as we have no control how they are assembled. I will confirm price this week.
Click to expand...

Woohoo! Will go out this week. Do you want stock as well or just the metal bits?
Thanks John, you rock!
 
PinkyPlinker said:
Woohoo! Will go out this week. Do you want stock as well or just the metal bits?
Thanks John, you rock!
Click to expand...

Ideally all the parts so we can assemble a complete rifle, I have included all shipping in the estimate just to keep things simple. Total is plus tax. Please do not include any optics, slings or other additions.
 
do we have an update on a stripped receiver, and by update i mean pricing? it would be awesome if they were just bare steel so we could get them cerakoated our selves and help reduce the costs.
 
upinsmokeweldinginc said:
do we have an update on a stripped receiver, and by update i mean pricing? it would be awesome if they were just bare steel so we could get them cerakoated our selves and help reduce the costs.
Click to expand...

Stripped uppers may not happen due to lack of interest and the liability issue , barrels are a press fit, this is not like building your own AR on the kitchen table, something lots of us have done quite safely. Best estimate right now, is in the $550 to $600 range
 
I would be sending the receiver to Dlask to get threaded in just like test rifle is doing. $550 eh. Ok, so would it be cheaper if it wasn’t coated? Was hoping to see it around the $450-$500 range
 
Hey John, got your email...I am currently overseas, I packed up the parts kit the same way I received it from you and asked the wife to send it out while I'm gone, but my question is, will Kodiak defense be able to match the coating that the CZ rifles came with?
 
cranswick said:
Hey John, got your email...I am currently overseas, I packed up the parts kit the same way I received it from you and asked the wife to send it out while I'm gone, but my question is, will Kodiak defense be able to match the coating that the CZ rifles came with?
Click to expand...

They will not be doing any special finish but their standard finish that we see on the Kodiak 858 rifle is a very good match. I think these rifles look extremely good. Just look at other reports on these rifles.
 
upinsmokeweldinginc said:
I would be sending the receiver to Dlask to get threaded in just like test rifle is doing. $550 eh. Ok, so would it be cheaper if it wasn’t coated? Was hoping to see it around the $450-$500 range
Click to expand...

No cheaper, to keep the cost to where it is we have to accept a production run, so they are all the same. We are only talking of a handful at the best.
 
Mr Wolverine said:
They will not be doing any special finish but their standard finish that we see on the Kodiak 858 rifle is a very good match. I think these rifles look extremely good. Just look at other reports on these rifles.
Click to expand...

my apologies, I just looked at some pictures of the completed Kodiak/cz 858 Spartan, and they look great! Can't wait for this to come together, and I can't thank you enough for making this possible. I just confirmed my parts kit is en route to you, now as for payment how do I go about it?
 
Damn nice m43 round rifle!

I had the pleasure to visit wolverine supplies shop to hold one of these canadian made 858's and they are sweet! Also if you are ever passing by Virden Manitoba take the time to visit Wolverines place. Just for the ww2 guns on the wall alone it's worth the trip!
 
For all of you that would like their CZ 858 part kit built onto a complete rifle I need your kit here, at Wolverine Supplies by the 27th Oct. Target date for completion will be the end of Nov. All packages must be marked "Kodiak CZ 858 Build" on the outside. I will confirm price this week. Cost is $825.00

I only have 5 kits returned for re-building! Last call, if any come in at a later date the cost will increase due to individual shipping costs.
 
Status
Not open for further replies.
Back
Top Bottom