I have gotten my hands on a gen # Krinker Plinker it but no instructions for it. I am going to take a pic of what I have but can anyone help me out with instructions as I know for a fact the kit is missing 1-2 pieces for sure. I need to try to source these pieces or make/fab some up if they are not elaborate. I have tools and time and google on my side. Any help would rock guys!!!!!!! I will take a pic after I get my boys in bed for the night. Chime in please with links or do you have instructions around from your old kit???
Krinker Plinker GEn #1
- Thread starter Drewz
- Start date
Done!!!!!!!
On another note guys, I have the receiver and trigger group finish mounted and done. The rear stock is an AK fixed tapco stock wth a wedge that takes 2 screws to mount it up. I have no idea how this mounts and the front handguard sits in the new sheet metal reciever but there seems to be no front mount for it to attach to?? Even pics of your guys front handguard mounting point and rear stock fitment/mounts will help guys!!!!
On another note guys, I have the receiver and trigger group finish mounted and done. The rear stock is an AK fixed tapco stock wth a wedge that takes 2 screws to mount it up. I have no idea how this mounts and the front handguard sits in the new sheet metal reciever but there seems to be no front mount for it to attach to?? Even pics of your guys front handguard mounting point and rear stock fitment/mounts will help guys!!!!
Drews,
Both my KP's have folding stocks, so I'm not too sure how the fixed stock attaches to the chassis? (did they ever make a fixed stock version?)
It seems your missing the forearm cap (I do see the retaining clip for it though)
This cap hold together your upper and lower forearms and the retaining clip slips in front of it to hold it on your barrel.
Are you also missing the front sight and the original barrel??
Both my KP's have folding stocks, so I'm not too sure how the fixed stock attaches to the chassis? (did they ever make a fixed stock version?)
It seems your missing the forearm cap (I do see the retaining clip for it though)
This cap hold together your upper and lower forearms and the retaining clip slips in front of it to hold it on your barrel.
Are you also missing the front sight and the original barrel??
SO from your pic I am issing the rear stock adapter adn the front stock piece as well. I have the front and rear sights as well as the rail that goes with the rear sight. Can you get a couple pics of the front piece?? Yes I do not have the barrel but have the FH for it. Any idea where to source the parts other than contacting plinker directly??
Dj_Squelch
Regular
- Location
- Whitecourt Alberta
Parts: Try Fabsports, they may have some parts covered in dust somewhere
Stock: The stock you have needs some messing with ti make it fit, it wasn't originally designed for the kit I'm pretty damn sure
Hand guard: My kit has a grove cut in the barrel and a c-clip goes in there to hold the bracket in place which in turn holds the hand guard in place.
Stock: The stock you have needs some messing with ti make it fit, it wasn't originally designed for the kit I'm pretty damn sure
Hand guard: My kit has a grove cut in the barrel and a c-clip goes in there to hold the bracket in place which in turn holds the hand guard in place.
I have figured out a rear stock mount so I have to get started making it so the rear stock will sit down 1/4" lower to look proper in the new setup. The black tape on the barrel is the ideal non-restricted length I want to acheive. The front stock upper is loosely mounted but the lower is only help by the black tape for mockup/alignment. I also am making a couple drawings for myself to help visualize what the front mount will be like. I want the front handguard mount to be one piece preferrably. Also the finished gun will be either duracoted or sent off to cobra imaging for a custom coat. There is a certain fellow on here I would love to send this too as well for some Zombie airbrushing but that is another story.
