Kriss Vector 22LR CRB limited Edition with PDW stock mod

[g36k]

Was lucky to get my hands on one of these. I added a VFC 416 PDW Airsoft Stock and Eotech 512. This new setup actually fits in the factory case which is a bonus.

The PDW stock was slightly smaller diameter than the mil-spec buffer tube threading, so I had to basically screw it in all the way, no castle nut, and use the 2 retaining screws / set screws on the underside of the body to keep it in-place.

PDW stock was purchase from evike in the US, I think they are sold out now, but it's all-metal so should hold up just fine on a 22LR.

 

[Foxer2373]

Still trying to get my hands on one of those, that VFC setup makes it look even better, and a better length.

 

[g36k]

They are coming up on GP from scalpers - but selling for $1200 - $1500.

With this setup, OAL = 30"

One issue is the rails - when fully collapsed they intrude into the trigger area by about 1cm. It does not impede the trigger movement but you have to lower your finger about 1-2mm.

All the Vectors are front heavy, so I was worried about making the rifle feel worse, but the shorter LOP actually helps bring the weight in closer so it actually feels more comfortable.

No range test yet. Looking forward to getting out there and trying it.