Kriss Vector sling options?

Patt08

Patt08

CGN Ultra frequent flyer
Rating - 100%
66   0   0
Location
East of the Rockies... West of the rest.
Looking for sling options. Is that push pin single point sling the only option? Or is there like a QD picatinny attachment or something. Just curious what other people have done! Want something comfortable for carrying my vector around for gophers lol.

EDIT: should clarify i have a Gen1
 
Last edited:
I have a Gen 2 Vector with the QD cups in the stock (or at least I used to), so I picked up a Magpul RSA QD Rail Sling Attachment for the pic rail and ran a Magpul MS4 sling. I was very happy with that setup, but I went and got an original folding stock, which I am also very happy with - but I'm back to the drawing board on sling options. Damn temped to drill into the new folder and JB Weld a QD cup in there, lol.

I feel like the push pin sling mount isn't a good fix, and used in congunction with the Mapul RSA, I feel like the two points would be awefully close together, but it might work out.
 
I just tried my MS4 with the RSA attached to the back end of the pic rail and the stock folded. It works... Kinda. You would have to detach the QD from the RSA to get the gun into play. Not the way I would go, and it certainly wouldn't work at all without a QD mount cause of that folding stock. If I come up with something, I will let you know.

PS. If you got yourself a Gen 2 Collapsible Stock with the QD, you would not regret my previously mentioned setup. Just depend on how important the folder is to you.
 
Yail Bloor said:
I just tried my MS4 with the RSA attached to the back end of the pic rail and the stock folded. It works... Kinda. You would have to detach the QD from the RSA to get the gun into play. Not the way I would go, and it certainly wouldn't work at all without a QD mount cause of that folding stock. If I come up with something, I will let you know.

PS. If you got yourself a Gen 2 Collapsible Stock with the QD, you would not regret my previously mentioned setup. Just depend on how important the folder is to you.
Click to expand...

Thanks for help. I'll keep searching as well.
 
While not ideal, I rigged up a system that will at least give me some degree of comfort while walking around with the vector. This does not work great to sling over your shoulder, but works pretty good having the gun off the front in sort of a "sling ready/patrol carry" position.

Used an old key chain ring to go through the loop hole on the stock (until I can find something better lol), a pic section and magpul RSA qd attachment. The only gripe I have is that the charging handle very very lightly touches the RSA attachment after charging the firearm and letting it go back to the home position. Not enough to mark up the charging handle from what i can see (yet). If I mount the RSA on the forward most part of the rail it has just enough clearance, but I wasnt 100% happy with the sling there. I suppose I could lose the MBUS on the front and mount the RSA there, or maybe right behind it too.

Edit: Mounted the RSA behind the mbus and its much more balanced. Took the Pic rail off.

vectorsling1.jpg
vectorsling2.jpg
 

Attachments

  • vectorsling1.jpg
    vectorsling1.jpg
    57.7 KB · Views: 60
  • vectorsling2.jpg
    vectorsling2.jpg
    99.6 KB · Views: 59
Last edited:
Pretty similar to my setup, but I put the RSA between the MBUS and my EoTech. Like I said, worked better when I had a QD cup on my stock.
u3jfY0v.jpg
 
I tried a pic rail on the side of one of my gen 1's but didn't like cheese gratering my hand charging the rifle. I just picked up a gen 2 and am thinking paracord might be the best option.
 
You must log in or register to reply here.
Back
Top Bottom