You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
Labradar indoors troubleshoot
- Thread starter MartyK2500
- Start date
I set up at the 20M line.
Another detail, I also used a table that didn't have plexiglass brass shields.
The radar can interfere with itself it too close to a wall/division.
I had very accurate and consistent readings for 0M, 3M, 6M, 9M, 12M and 15M.
The 3M velocity is the one that resembled a classic chronograph method the most, which had just a tiny drop compared to 0M reading.
But will use 3M reading anyways to protect myself for PF.
Another detail, I also used a table that didn't have plexiglass brass shields.
The radar can interfere with itself it too close to a wall/division.
I had very accurate and consistent readings for 0M, 3M, 6M, 9M, 12M and 15M.
The 3M velocity is the one that resembled a classic chronograph method the most, which had just a tiny drop compared to 0M reading.
But will use 3M reading anyways to protect myself for PF.
you will be 100% with 3.2 gr. I have shot thousands of my own reloaded rounds measured over numerous chronos (including 4 lab radars) and they are 100% fine at 130-136 PF with the following load: 3.2 gr of TG, Fiocchi, CCI or Federal primers with CamPro 147 gr bullet and seated to 27.90mm. I have 4 different guns and Tafoglios with polygonal rifling get an easy 136 PF, CZ Shadow (old one) gets 130 PF.
Your gun will tell you what you need, every load will vary slightly. I know of at least two people that use coated billets with 3.1gr of TG and get 135 PF.
If you run 135-138 PF you are good to go, just don't scrape the 125 PF limit, it will be just the matter of time before you are in deep s...t
Your gun will tell you what you need, every load will vary slightly. I know of at least two people that use coated billets with 3.1gr of TG and get 135 PF.
If you run 135-138 PF you are good to go, just don't scrape the 125 PF limit, it will be just the matter of time before you are in deep s...t
