lakefield 64b question

[tdmx2]

Good afternoon folks'

Looking for the thread size for the barrel bolt and the rear receiver bolt for a Lakefield 64 b. Both of mine pulled the thread out of the receiver. Want to rethread to original size. I think its a m8x1, but want to make sure. Thanks.

 

[burnt_servo]

I have a box of lakefield parts here somewhere .....

so to be clear the part your looking for is the bolt with a tapered point , that threads into the receiver and the tapered point matches up to a tapered hole in the barrel to locate the barrel ?

 

[burnt_servo]

found the box , found a receiver , the threads where pulled on it too . no bolt to be found .

wasn't there a screw that retained the stock , held in place by the same bolt ?

 

[tdmx2]

Yup! that's the bolt I an talking about. holds the barrel in and then the stock bolts to it. What is the bolt size and thread on it?

 

[smoji]

Good afternoon folks'

Looking for the thread size for the barrel bolt and the rear receiver bolt for a Lakefield 64 b. Both of mine pulled the thread out of the receiver. Want to rethread to original size. I think its a m8x1, but want to make sure. Thanks.

5/16" - 32