Lapua brass ?

[viper]

Do you guys debur the flashhole on lapua brass

thanks

 

[stevebc]

With Lapua, all I do is neck size, load and shoot.

 

[cycbb486]

Even

though it is GREAT brass I still deburr and uniform the pockets.

CYB

 

[maynard]

Lapua flash holes are drilled not punched so there is no need to debur them.

 

[Jose]

I debur mine. Not that they really need them, but more for peace of mind. This way I know that all my cases are equal. Besides it's a one time operation that doesn't take much time.

 

[CyaN1de]

Lapua flash holes are drilled not punched so there is no need to debur them.

I disagree. I looked in my new cases and could see burrs with the naked eye. Looked mush smoother after deburring with the appropriate tool.

Same as drilling through a piece of steel, drill bit always leaves rough burrs on the backside of whatever material you are drilling.

 

[TangoKilo]

Lapua brass is the best stuff going!! I plan my rifle builds around the availability of Lapua brass.

I run it through a full length die and load!!

 

[JUDES BOUCHARD]

Lapua brass

Lapua brass is the best stuff going!! I plan my rifle builds around the availability of Lapua brass.

I run it through a full length die and load!!

So i do, just neck size, and for your new plan, 6.5-284 Norma brass are impressives.

Judes

 

[cycbb486]

Poison man,

I disagree. I looked in my new cases and could see burrs with the naked eye. Looked mush smoother after deburring with the appropriate tool.

Same as drilling through a piece of steel, drill bit always leaves rough burrs on the backside of whatever material you are drilling.

I agree with you 100%.

CBY