Lee Mould 9mm

[Bassmaster]

There are other molds that Lee sells that would size down very easily for 'heavy 9mm'...90328 for instance.

 

[gnmontey]

There are other molds that Lee sells that would size down very easily for 'heavy 9mm'...90328 for instance.

Hu..... so you guys are loading 38s for 9mm eh? I may have to give this a try. Really want to get back to 147 gn for 9mm.

M

 

[legi0n]

Hu..... so you guys are loading 38s for 9mm eh? I may have to give this a try. Really want to get back to 147 gn for 9mm.

M

my 9mm slugs at 0.357 so..yes

 

[XperienceDUDE]

I've never had good luck with cast in a 9mm; at least cast bullets in the traditional sense (tumble or wax type lube).

Powdercoat on the other hand has been great, I run a Lee 90465 with cheapo princess auto powdercoating powder. I find that PC bullets perform very consistently in most of the handguns I've run it in and are the closest thing to a FMJ/plated bullet.

Your mileage may vary though, there have been plenty of guys that run a "traditional" cast bullet with good results.

where do you get your powder coat

 

[digitalblue]

where do you get your powder coat

Princess Auto, ~$12/lb

 

[XperienceDUDE]

Princess Auto, ~$12/lb

and what color worked best for u ?