Legal 10/22 barrel length ...
- Thread starter Otokiak
- Start date
This has been discussed many times on here.Do as search and you will get alot of info.
Basicaly you can have it as short as you want as long as the over all length of firearm is over 26 inches.
I curantly have a 10 inch barel on mine and my overal length is 29 inches so i could go shorter if i want.Bits and pieces can make you any length of barel or you could look for a charger or krinker barel.They come up for sale occasionaly on here.
Basicaly you can have it as short as you want as long as the over all length of firearm is over 26 inches.
I curantly have a 10 inch barel on mine and my overal length is 29 inches so i could go shorter if i want.Bits and pieces can make you any length of barel or you could look for a charger or krinker barel.They come up for sale occasionaly on here.
aftermidnight
CGN frequent flyer
- Location
- West Kelowna BC
Well.. As short as you want it, down to 106 mm.... And what pc9 said.
CNADNSL8-5
CGN Ultra frequent flyer
- Location
- Southern ON.
Check out the 10/22 picture threads int the photo forum and the rimfire forum.
Here is mine. 8.5" barrel OAL is 27.5" with a factory synthetic stock.
CNADNSL8-5
CGN Ultra frequent flyer
- Location
- Southern ON.
Fabsports sold them. They are not listed on the site any more, but I think you can still ask for them.
This is my 1022 with my Thompson conversion kit and it has a 10" barrel. Overall length is 29" so its non restricted.
Fabsports has some 10" barrels in their 1022 section. They are sold out of the finned barrels but their tapered 10" barrels I beleive are still in stock and they are a VERY nice barrel. Just make sure you stay over 26" overall length and you will be fine. Btw, folding stocks won't cut it as they measure the length with the stock in the shortest position and you will always end up too short to stay non restricted.
Fabsports has some 10" barrels in their 1022 section. They are sold out of the finned barrels but their tapered 10" barrels I beleive are still in stock and they are a VERY nice barrel. Just make sure you stay over 26" overall length and you will be fine. Btw, folding stocks won't cut it as they measure the length with the stock in the shortest position and you will always end up too short to stay non restricted.
Moparlover
CGN frequent flyer
Last edited:
Moparlover
CGN frequent flyer
http://
ruger charger/ fabsports 556 kit, 6 inch barrel and KX3 on the front
Moparlover
CGN frequent flyer
http://
same one, with no rear, HK 3 lug adapter and HK MP5 QD flashhider
That Thompson conversation is sweeeet! 
Moparlover, I like the 556 kit ... would like to build a full length barrelled 10/22 on one of those!
I have a Butler Creek folding stock that I want to build a 10/22 on but with the shortest allowed barrel length ... hence why I started this thread.
Keep the pictures, idea's coming my fellow CGNer's ... cheers,
Otokiak
Rankin Inlet, NU
CANADA
Moparlover, I like the 556 kit ... would like to build a full length barrelled 10/22 on one of those!
I have a Butler Creek folding stock that I want to build a 10/22 on but with the shortest allowed barrel length ... hence why I started this thread.
Keep the pictures, idea's coming my fellow CGNer's ... cheers,
Otokiak
Rankin Inlet, NU
CANADA
