Lets see some PE90 Swiss Arms photos...
- Thread starter HeadDamage
- Start date
Just adding this from another tread incase it is usefull to anyone:
With the ARMS #35 QD mount and low rings the scope is the perfect hight for use with the cheek piece however it still leaves the frount of the scope with less suport than I'd like. However is does look like it would fit the new Leupold Mark4 MR/T 3-9x36mm scopes very nicely as they have less eye relief and they are about an inch shorter in total length.
A scout rail like this RRA unit could also work well (needs to have about an inch trimmed off of the back end) but it results in the scope being higher off of the center line of the rifle. Some people might like this option but I'm trying to get the scope as low as I can.
FYI.... the ARMS #35 with low rings puts the bottom of a 30mm scope tube 0.6" above the top of the Rooster rail. The Armalite puts it 0.65" up. The RRA with Leupold Mark4 STD rings puts it 0.9" up. I also have a rail that fits the ARMS #35 QD base but it results in a height of 0.975" up. If I could live with the height the ARMS #35 with rail would be the best option that I've tried.
Ok... here are some shots of the ARMS #35 QD base with rail and Leupold Mk4 rings:
With the ARMS #35 QD mount and low rings the scope is the perfect hight for use with the cheek piece however it still leaves the frount of the scope with less suport than I'd like. However is does look like it would fit the new Leupold Mark4 MR/T 3-9x36mm scopes very nicely as they have less eye relief and they are about an inch shorter in total length.
A scout rail like this RRA unit could also work well (needs to have about an inch trimmed off of the back end) but it results in the scope being higher off of the center line of the rifle. Some people might like this option but I'm trying to get the scope as low as I can.
FYI.... the ARMS #35 with low rings puts the bottom of a 30mm scope tube 0.6" above the top of the Rooster rail. The Armalite puts it 0.65" up. The RRA with Leupold Mark4 STD rings puts it 0.9" up. I also have a rail that fits the ARMS #35 QD base but it results in a height of 0.975" up. If I could live with the height the ARMS #35 with rail would be the best option that I've tried.
Ok... here are some shots of the ARMS #35 QD base with rail and Leupold Mk4 rings:
Just a few Quick Questions:
1. Why is it Blue?
2. What's with that little "bubble" on the Barrel behind the Flash Suppressor
3. How does it shoot? Acurracy etc? I'm not a stickler for it like some people who want 1inch groups at 1000 yards... :roll:
1. Why is it Blue?
2. What's with that little "bubble" on the Barrel behind the Flash Suppressor
3. How does it shoot? Acurracy etc? I'm not a stickler for it like some people who want 1inch groups at 1000 yards... :roll:
It is blue for the reason that smurfs are blue... it doesn't scare people 
Other than that I don't know. They come/came in Red, Blue, Black, and Green.
The barrel bump is to aid in the firing of NATO spec rifle grenades.
It shoots freaking great! I forget that the exact garentee is but it is around 1 or 2 MOA at 300m or something close to that. I have done better than 1moa but it is ammo dependent.
Other than that I don't know. They come/came in Red, Blue, Black, and Green.The barrel bump is to aid in the firing of NATO spec rifle grenades.
It shoots freaking great!
I forget that the exact garentee is but it is around 1 or 2 MOA at 300m or something close to that. I have done better than 1moa but it is ammo dependent.Electrical tape... brilliant! But it's just too late for mine, the paint is already damaged.
1 MOA is 1 minute of angle, it is about 1 in @ 100 meters.
It fires .223 ammunition.
And before you start seriously thinking about buying this rifle, you better consider the fact that these rifles costs 3000$ + tax(es).
1 MOA is 1 minute of angle, it is about 1 in @ 100 meters.
It fires .223 ammunition.
And before you start seriously thinking about buying this rifle, you better consider the fact that these rifles costs 3000$ + tax(es).
- Location
- Ontario defense force (ODF HQ)
Hey Nester how far away was that test target?
