Let's see your Model 700 hunters!

[deerfarmer]

With so many of them made there have to be some real lookers out there. I'd like to present my shooting stick - I think she's a beauty queen. An older 700 chambered in .308win with bbl cut down to 20" - sporting a modern laminate stock (thanks troutseeker!). Doesn't get any better for me!

 

[hunter5425]

This is the only one I have a picture of, it,s my wife's 7-08 with a Shilen 23" barrel and a Wildcat composite stock.

 

[two-dogs]

yep, she's a real sweet pea for sure and in 308, you can't go wrong! I see you have the "right" scope on it, too! Awesome! I love Leupy's. I have a few 700BDL's and love them all. By the way, a fantastic row of stacked Birch firewood you have there and what a glorious green back ground! God's land???
I have some Rem 700 target rifles, right hand bolts, heavy barrel, and a custom stock to fit them all, one at a time, I shoot left, the stock accepts right hand bolt actions and allow for a custom thumbhole left hand shooter to operate. Awesome! Made by my friend Steve (GunPro).
Sorry, but I'd loose those 8 hole rings in a real big hurry! And bring the scope down a bit, Leupy makes low and super low rings. Burris is a good choice, as well.

 

[Dogleg]

.375 H&H built in the custom shop, I believe in '82. It has a Zeiss Diavari 3-9 in Leupold QRW rings.

The rifle holder was it's 10th, and my 19th.

 

[guntech]

22" Gaillard barrel - 7mm 08 on a long action with a Kwik Klip. Dual dovetail mounts.
It currently sports a little lightweight Leupold 3-9 instead of the 3.5-10 pictured

Gaillard barrel - 338 06 with a Kwik Klip. Dual dovetail mounts.
3.5-10x40mm Leupold B & C. Barrel is now matte finished at 22 inches.

 

[SuperCub]

Faux TI in 257 Roberts

 

[SuperCub]

A few ass't actions. The 223 has been barreled up. No pics.

Faux TI in 22/250

375 Chatfield-Taylor

 

[two-dogs]

A few ass't actions. The 223 has been barreled up. No pics.

Faux TI in 22/250

375 Chatfield-Taylor

So, what kind of firewood is that SC? Looks like good heat to me! We usually go with tamarack around here, I hate to carry out ashes.

 

[deerfarmer]

Awesome! all beauties guys, but I think dogleg's takes the ###iest wood award for the evening! Keep em coming

 

[deerfarmer]

I have a few 700BDL's and love them all. By the way, a fantastic row of stacked Birch firewood you have there and what a glorious green back ground! God's land???
.

Thanks two-dogs, guns and firewood seem to go together nice don't they - next best thing to harvest pics

 

[blargon]

 

[labrador76]

Great thread farmer! I have a few 700's as you know, but they are all too ugly for this page!

 

[Kelly Timoffee]

7mm-08 with a 1 in 9" Krieger , varmint contour , Henry Remple worked, 4.5-14 x 50 Conquest.

 

[manitou210]

1974 700-308









Kick my butt for selling this one, Rem 700 7 mm wsm Hart Barrel Mc millan Stock one happy CNG member who has it now.


Pre-runner of the 700 a 721 40x Vintage 1956 serial # 15xx

 

[Pickles]

Here's a few.

 

[Eagleye]

I'm in. Bottom rifle is a Leeper-built 308 Norma Mag on a 700 Action with a McGowan 26" 1-10 twist barrel
Stock is from the Custom Shop...Tiger maple. Rifle now sports a Leupold 3.5x10 B&C instead of the Mark II.

Next is my 700 Classic in 8x57, with the most gorgeous fiddleback Walnut handle.


Have many 700's, some plain, some fancier, like these. Love my 700's.
Regard, Eagleye.

 

[c-fbmi]

Gunnutz doesn't have enough bytes to display my collection of 700s.........I'll take some photos tomorrow and see if we can fit them on here!!!!!!

 

[dpopl8r]

M700 SS, Gaillard tube and a bansners stock chambered in 7mmRem Mag.

 

[track]

Custom 257 Weatherby, 28" barrel.

 

[Camp Cook]

Sold both of these now replaced them with identical rifles but with LSS (black/gray) laminate stocks and yes finished fitting the recoil pads after I took the pic.

Top 375RUM shot my B&C interior grizzly with this one bottom 300RUM my son was packing this one on the grizzly hunt and shot his grizzly with it on a seperate hunt.

This is my all time favorite 700 also chambered in 375RUM different rifle than the one in the pic above.

Barrel shortened to 21" and NECG banded front sight/post work by Guntech on Van Island set up with QRW rings/bases I mount a VX3 4.5-14X40mm B&C reticle scope when I remove the scope I mount a XS Sights Tall Weaver backup ghost ring sight.

I have and have had other 700's but no pics of the rifles.