Well I have been busy at the range the past couple of days and once last week. I finally found a good load for my Sauer 202 in .243 that shot 1/3 moa after switching to H4350 powder.
My Rem 5R in .308 was so easy to get sighted in and find a good load, I could have quit after the first group. IMR 4064 with Hornady 168 gr HPBT.
But the same loads in my new Sako Finnlight did not work out so well. Think I may try a can of Varget and maybe some other bullet. This is a light rifle and I could feel the recoil much more than the Rem 5R and it heated up and held the heat longer. I did give it a couple of minutes between shots. Also the trigger felt abit heavy so I adjusted that down this morning. Kind of wish now that I had got a laminated wood stock and heavier barrel.
Any suggestions/pet loads or bullet types that you may have had luch with? I would like to get this rifle down to 1/2 moa or better if possible.
Any ideas or suggestions would be much appreciated. Cheers Roscoe
My Rem 5R in .308 was so easy to get sighted in and find a good load, I could have quit after the first group. IMR 4064 with Hornady 168 gr HPBT.
But the same loads in my new Sako Finnlight did not work out so well. Think I may try a can of Varget and maybe some other bullet. This is a light rifle and I could feel the recoil much more than the Rem 5R and it heated up and held the heat longer. I did give it a couple of minutes between shots. Also the trigger felt abit heavy so I adjusted that down this morning. Kind of wish now that I had got a laminated wood stock and heavier barrel.
Any suggestions/pet loads or bullet types that you may have had luch with? I would like to get this rifle down to 1/2 moa or better if possible.
Any ideas or suggestions would be much appreciated. Cheers Roscoe


















































