I just concluded a loading test for 45ACP pistols. I tried 9 different loads in 14 different pistols and one revolver.
The bullets used were DRG cast lead 200SWC and 225 FP.
All but two pistols got the best group with either the 200SWC over 4.3 gr of TiteGroup (780 fps) or the 225 FP over 4.3 gr of TiteGroup (750 fps).
The second test was for a load with a bit more power. 6.0 gr of Universal Clays worked well with both bullets.
All testing was at 25 yards. I shot standing with 2 hands, so my shooting errors are part of the groups.
Here is a CanAm Norinco 1911 group. The only modification to this pistol is some spring clipping and bending, a longer trigger and a set of Hogue palm swell grips. About 2 3/4":
The bullets used were DRG cast lead 200SWC and 225 FP.
All but two pistols got the best group with either the 200SWC over 4.3 gr of TiteGroup (780 fps) or the 225 FP over 4.3 gr of TiteGroup (750 fps).
The second test was for a load with a bit more power. 6.0 gr of Universal Clays worked well with both bullets.
All testing was at 25 yards. I shot standing with 2 hands, so my shooting errors are part of the groups.
Here is a CanAm Norinco 1911 group. The only modification to this pistol is some spring clipping and bending, a longer trigger and a set of Hogue palm swell grips. About 2 3/4":
Last edited:


















































