Loads for 6.5x47

[bear cat]

Looking to cheat a bit and steal your loads for the 6.5x57.

Rifle is rem 700 short action blue printed. 28" jury barrel 1 in 8 twist with rem varmint contour. Macmillan a 3-5 stock. It will have a nightforce to top it off. Rifle will not be done tell about the start of June.

Looking to use the slower powders. The fastest being h4350.
Bullets will be whatever it likes best but hopefully it will be the 140 Berger hybrids. Wouldn't shy from 139 scenars or 143 eld-x.

Thanks in advance.

 

[dfarrell]

Haven't had time to get out and shoot since, but best group I ever shot was with 140gn hybrids, 39gn of H4350, cci mag primers. Magnetospeed told me they were coming out at 2717fps.

 

[cheaplaughs]

I've only shot 123gn so far. 37.5 gns of varget. I didn't chrony yet but at 200m I put 4rnds in one hole. I have 140gn for my 260 that I will try.

 

[SteveB]

I am shooting 40.3 grain H4350, CCI450's, 140 Berger's, Jumping .020". Very tight groups

 

[Gunneegoogoo]

Lapua Brass, 37.5gr Varget, pushing 130gr Berger's, 2.708COAL. Way more accurate than I deserve.....

 

[bear cat]

Thanks folks. Anyone using h 4831sc, h-1000, rl 22 or 25?

 

[Pr589]

See the link below for some load recipes.

http://www.accurateshooter.com/cartridge-guides/65x47/

 

[Alpheus]

I've had great results with N150. Varget worked okay, little higher pressure. H4350 for some reason was very slow in both my 6 and 6.5x47L.