Local gunsmiths?

[larolarolaro]

Are there any gunsmiths in or around Haldimand/Norfolk, Brantford or surrounding areas? Seems like a gunsmith is relatively hard to find.

I have a shotgun bead sight that is not centered. Wondering if the hole can be filled in and barrel drilled and tapped in the proper spot.

 

[guntech]

If it is a small thread now, it is possible to dremel the hole a bit in the direction it needs to go, thread it for a larger thread and install a new bead.

 

[larolarolaro]

If it is a small thread now, it is possible to dremel the hole a bit in the direction it needs to go, thread it for a larger thread and install a new bead.

It’s a small thread but I think it’s too far from center. Need a pro opinion.

 

[guntech]

The easiest way would be red loctite a plain bead in place, file it down to the surface of the barrel, hone the interior of the bore until the thread is flush with the bore. Then drill and tap for the new bead a short distance away from the loctited thread.