Bonjour43ma
CGN frequent flyer
- Location
- GVRD
Poor planning. Just need to update your post so people know what's happened.
LOCKHART ** A15 Builders Dream Sale ** ONE TIME BUY - ABSOLUTE LOWEST PRICES
- Thread starter lockharttactical
- Start date
bobdbldr
CGN Ultra frequent flyer
- Location
- Nova Scotia
Well, I got a nice Freedom PSA kit so far, got one more lower to finish or sell, I would like a .40 cal. Pistol kit with a 9-11 inch barrel,,, not being picky
I actually haven't seen anyone with .40 cal kits yet, but my Google foo isn't the greatest!
I actually haven't seen anyone with .40 cal kits yet, but my Google foo isn't the greatest!
koesdibyo
CGN frequent flyer
- Location
- Orillia, Ontario
Bad Lieutenant
CGN frequent flyer
- Location
- GTA
Wow. End of day 6 since "the big announcement!" and still nothing...
Either they have a strange definition for the word "shortly" or something has really gone off the rails over there.
What a let down. I think everyone that has posted in this thread so far should get some free sh!t...
Either they have a strange definition for the word "shortly" or something has really gone off the rails over there.
What a let down. I think everyone that has posted in this thread so far should get some free sh!t...
bobdbldr
CGN Ultra frequent flyer
- Location
- Nova Scotia
Yep, more and more coming out from sponsors, if the worst happens and the turd gets back in and bans AR, it is possible as in California and other states, that they also ban importing AR parts into the state, this is why zi want to finish my paperweights now or at least have the kits on hand! I was thinking of even getting one or two extra kits to squirrel away.
Edit: as I have said before ,if the ban happens, they get the stripped lower only, I will call in that I took the barrel off and sold it etc. Which is perfectly legal, and all I have left is the lower, "here you go fellas, oh, what is that you say? That is what a stripped lower looks like after I put it in the vice and flattened it then shot it 10 times with my Mosin, but you can still see the serial number, now go f::k yourself."
Last edited:
bobdbldr
CGN Ultra frequent flyer
- Location
- Nova Scotia
$250. AR-15 kit less lower in .223, x39, 6.5, .308, 300 BO, annnnd .40 cal.! Magpul furniture all around, includes Mbus iron sights and of course, for those who care, option of a chrome lined barrel, in lengths fro 5" to 20"!
koesdibyo
CGN frequent flyer
- Location
- Orillia, Ontario
Sam is usually renown for replying very quickly, I’m surprised it has taken this long.
There is a possibility there has been something major happen, and it wouldn’t be out of the norm that in a case of a small business (not sure how many employees Sam has, but I’d imagine he’s close to a 1 man show) having some issues (family, personal, etc) that things like releasing a DEAL to cgners isn’t a priority.
Have some patience people.
It USED to be a virtue.
There is a possibility there has been something major happen, and it wouldn’t be out of the norm that in a case of a small business (not sure how many employees Sam has, but I’d imagine he’s close to a 1 man show) having some issues (family, personal, etc) that things like releasing a DEAL to cgners isn’t a priority.
Have some patience people.
It USED to be a virtue.
that's an oof
not even logged in for 4 days
Lockhart has always been awesome in my experience. I once sent them an email about bringing in a product that wasn't on their website (They had a very similar product, but not the exact one I was looking for)- Sam called me within 10 minutes, had the item added to the site, and had me all set up within an hour. Great service. This really seems like something happened. We'll find out, hopefully soon.
NoCturnal
Member
- Location
- British Columbia
Ya Sam has been solid for me too. He may not always have the answers you're looking for but he hasn't ever hid from a fight either. This is unusual and I hope everyone is OK.
mxzx440
CGN Regular
- Location
- Morinville
Sam has also been great for me. Patiently waiting to see what comes up. Just got a big Odin works order for one of the lowers I bought. Now have another that I need to complete.
Bad Lieutenant
CGN frequent flyer
- Location
- GTA
Still nothing? Has anyone talked to these guys on the phone in the past couple days?
- Location
- Ottawa, ON
Hope he’s okay.
Bigrounds8mil
CGN Regular
- Location
- Winnipeg, MB
Yep, talked to him tuesday trying to straighten an order out, still up in the air. He was on the road when we spoke
lockharttactical
Expired Business Member
- Location
- Vancouver Island, BC
CGN, We apologize for this ridiculous delay.
Some things came up as you can imagine and we've been doing our best to get through everything.
Long and short.
We are still going to do our absolute best to offer a budget friendly build kits, as well performance build kits.
LINK HERE TO BE NOTIFIED!
We've been in negotiations with our suppliers ensuring they can get everything we need for the kits.
The price will be as advertised. Phenomenal.
Some parts have a lead time as they are being machined for us. We've been told somewhere around 2 months once orders are placed.
Luckily for most of you, its coming down to price and finish time most likely isn't a big concern.
For those of you who need performance parts and quickly, we will be offering the best deals we can on that.
On another note, we saw some flack on here while quickly reading a few of the comments.
Here are some updates
1) Raven project is not dead. We have been doing lots in the Backend and continued our investment into this firearm. We've added more and more enhancements and the price is still remaining at our extremely reasonable price.
2) We have a brand new shop in the middle of construction which should be finished within the next month or two. We're been working extremely long hours on the build making sure everything is going as required and as such we've been a bit behind on emails, phone calls and CGN etc. We apologize in advance, but our new streamlined operation will be even better than before.
3) We have a brand new 5 axis CNC machining coming. Did we mention we will now be able to cut parts that are 64" Long, by 34" Wide, 25" Tall? We'll be cutting Raven chips as well as our 4 other rifles. I know we didn't mention those before, but just like you, we hate hearing information and having to wait. We'll keep those a secret until they are ready to be sold.
Thank you for everyone's support and patience. For those who follow, we appreciate it! For those who don't, we will continue trying our hardest to have you on Team Lockhart. Business isn't always easy and we're not always perfect. At the end of the day my promise to all of you is that we will always do our best to make it right.
As we continue to grow, we will continue to advance forward in all aspects.
For those who wish to be notified via email as soon as we have pricing released for the building kits, we encourage you to visit our site via this link and click the YELLOW "Notify me when available" button
Some things came up as you can imagine and we've been doing our best to get through everything.
Long and short.
We are still going to do our absolute best to offer a budget friendly build kits, as well performance build kits.
LINK HERE TO BE NOTIFIED!
We've been in negotiations with our suppliers ensuring they can get everything we need for the kits.
The price will be as advertised. Phenomenal.
Some parts have a lead time as they are being machined for us. We've been told somewhere around 2 months once orders are placed.
Luckily for most of you, its coming down to price and finish time most likely isn't a big concern.
For those of you who need performance parts and quickly, we will be offering the best deals we can on that.
On another note, we saw some flack on here while quickly reading a few of the comments.
Here are some updates
1) Raven project is not dead. We have been doing lots in the Backend and continued our investment into this firearm. We've added more and more enhancements and the price is still remaining at our extremely reasonable price.
2) We have a brand new shop in the middle of construction which should be finished within the next month or two. We're been working extremely long hours on the build making sure everything is going as required and as such we've been a bit behind on emails, phone calls and CGN etc. We apologize in advance, but our new streamlined operation will be even better than before.
3) We have a brand new 5 axis CNC machining coming. Did we mention we will now be able to cut parts that are 64" Long, by 34" Wide, 25" Tall? We'll be cutting Raven chips as well as our 4 other rifles. I know we didn't mention those before, but just like you, we hate hearing information and having to wait. We'll keep those a secret until they are ready to be sold.
Thank you for everyone's support and patience. For those who follow, we appreciate it! For those who don't, we will continue trying our hardest to have you on Team Lockhart. Business isn't always easy and we're not always perfect. At the end of the day my promise to all of you is that we will always do our best to make it right.
As we continue to grow, we will continue to advance forward in all aspects.
For those who wish to be notified via email as soon as we have pricing released for the building kits, we encourage you to visit our site via this link and click the YELLOW "Notify me when available" button
theshootist
CGN Regular
Super excited
Bad Lieutenant
CGN frequent flyer
- Location
- GTA
Glad to finally hear from you and hear that everything is ok and moving along. Good luck with the new shop build btw. Like everyone else here, I'm waiting to see what kits you'll be offering and at what price. I'm also wondering; will these kits just be 5.56? Will 9mm be available? Or other calibers? Choice of barrel lengths? I would like to turn one of my AR lowers into a 9mm pcc with a short barrel and Glock mag adapter. So, I guess we'll see...
