Looking for 30 06 load data for 150 gr SST

[Ariu]

I bought one box of Hornady 150 gr SST bullets but my Hornady Handbook (4th edition) has no load data for them.
I plan to shot them from my Savage 116 and the will be used mostly on WT and maybe Mulies.
Questions:
Can I use 150 gr InterLock® BTSP data instead? They are both boat tails. I am not sure on their length difference and on change of COL.
Has anyone the 150gr SST load data fron the new hornandy book?

thanks

 

[K-C]

This is the 9th Edition Data:

 

[hometownhero]

Use data from anyplace that has data with the powder you want to use and similar bullet construction.

 

[Ariu]

Thank you guys. Hey K-C, I own you a beer or two.

 

[K-C]

Thank you guys. Hey K-C, I own you a beer or two.

No ya don't! I'm happy to have helped you out

 

[Ariu]

I was checking the data with what I have and there are some differences. Load data in my book uses
RIFLE: WINCHESTER MODEL 70; BARREL: 22", 1 in 10" TWIST; CASE: HORNADY/FRONTIER; PRIMER: FEDERAL 210; CASE TRIM LENGTH: 2.484"

Hornandy leads you to believe these new bullets will travel faster but comparing the old data (60.2gr H43050 for 3000fps) requires less powder as in the new handbook (60.5gr H43050 for 3000fps)

I was wondering if they are using different primers.

 

[K-C]

9th Edition, page 440
slightly different from yours but only in the barrel length:

RIFLE: WINCHESTER MODEL 70
BARREL: 23 3/4", 1 in 10" TWIST
CASE: HORNADY/FRONTIER
PRIMER: FEDERAL 210
CASE TRIM LENGTH: 2.484"

 

[Ariu]

Thanks again K-C

 

[Varmit]

56 grains of H4350 groups good in my M70 30-06 with 150 gr Hornady Interlocks. (flat base SP)