Looking for 300wm info from quick shot.

[rl4930]

Hi guys. I have been fooling around with some 300wm loads and I have found a fairly accurate recipe for a lower power load. I don't have a chrony, so I was wondering if one of you could punch some data into quick load to see what sort if velocity I should be getting. My load is

Winchester brass FL sized and trimmed
190 Berger vld hunting bullets
Winchester large rifle magnum primers
70 gr. of reloader 22
Length to ogive is 2.770, oal is 3.457

 

[dero338]

Shoot targets at ranges from 200 to 500 yards and put data in a software until it fits your targets at the range

 

[rl4930]

I'm just looking for a ball park velocity for that recipe in quick load. I should just buy a chronograph, it's on the to do list.

 

[rl4930]

Shoot targets at ranges from 200 to 500 yards and put data in a software until it fits your targets at the range

No offense intended, but I don't understand what you're saying?

 

[Biggunners]

I shoot 75 gr SCC4831 behind 180 gr Nosler Partition - 2900th ball park and 78 gr Max to 3100f/s

 

[rl4930]

Good info! I'm thinking I'm Probly closer to 2750 with this particular load if I had to guess.

 

[rl4930]

Anyone with quick load on here able to help me out or should I buy the software? One thing I forgot is it's out of a 24" barrel with 1-10" twist. And I'm about 40 thou of the lands if that makes a difference. ( i can likely creep up another 10-15 but my magazine might not feed properly).

 

[huntingfamily]

Just ran it through QL and it shows just under 2700 fps.
As you know, it's a low pressure/low velocity load for the cartridge.



VDD Group Canada

 

[rl4930]

Thanks so much! I really appreciate it.