looking for a good 303. brit load

British 303

Winchester brass trim to 2.212
CCI 200 LR primers
180gr Speer soft nose .311
IMR 4831-46grains
COL 3.000
25 in barrel mk1*
Tested 10ft from my cronograph

Avg 2100fps, accurate load, 1in group @ 50yrds with open peep sights, easy on the shoulder and rifle.

Good luck

Seabass
 
Sarge, I have shot 40gr. of IMR4064 with Hornady 150gr SP a lot. I got this load from my Uncle. It has been accurate in every Lee Enfield I have tried it in. Anyone using BLC2?
 
.303 british

try loading 125 sierra spitzers over 46.0 gr h335 cautiouslsy and you may be very suprised with acuracy , not to mention velosity . Also have loaded hundreds of rounds with hornady 150 gr sp wlr primers and blc2 powder quite accurate and efective on whitetail however you will want to watch for grass fires after shooting in the field [ excesive muzzle flash ]
 
blaser.306 said:
try loading 125 sierra spitzers over 46.0 gr h335 cautiouslsy and you may be very suprised with acuracy , not to mention velosity . Also have loaded hundreds of rounds with hornady 150 gr sp wlr primers and blc2 powder quite accurate and efective on whitetail however you will want to watch for grass fires after shooting in the field [ excesive muzzle flash ]
Click to expand...

Wow, I guess I better watch out for grass fires:rolleyes:

BTW, what's a Blaser .306??:D
 
ingman case, WLR primer, 47gr H414, sierra 150gr SP, 2" @100m No1 Mk3

H414 fill's cases very nicely and it throws very consistently from my LEE measure.
 
Lefty #### said:
Annealing?? what in the blue blazes is that going to accomplish? They are seperating at the web by the 5th loading, I just cull them after 3 for a safety factor.
It's a rear lock up Enfield, short case life is pretty much a given. I'm not generating any more pressure than vintage DIZ ammo loaded to MK VII ball specs.

Rookie hmmmm
Click to expand...


100% my point!!!!!!
 
You must log in or register to reply here.
Back
Top Bottom