Looking for Benelli M4 Wood Furniture

Bangalore said:
Sweet!
What did you have to do to get it to fit?
Click to expand...
Just need to take off a little bit of material on the handguards. Initially the stock set did not come with the recoil spring tube from Marstar but when I contacted them they sent it out as it was included in their pictures. You will need to swap out that tube if you have the collapsible stock like I did, not sure if you do if you have the field stock.
 
polkey said:
Just need to take off a little bit of material on the handguards. Initially the stock set did not come with the recoil spring tube from Marstar but when I contacted them they sent it out as it was included in their pictures. You will need to swap out that tube if you have the collapsible stock like I did, not sure if you do if you have the field stock.
Click to expand...
Thanks for info. šŸ‘šŸ¼
Just swapping field stocks!
 
polkey said:
This is what I put on my Benelli, took a little bit of fitting.
https://marstar.ca/product/impact-r4-wood-stock-and-handguard/

View attachment 1139047
Click to expand...
Just got my hands on a set! Mine didn't come with the nut for the recoil tube inside the stock, but a locknut and washer solved that easily.

I also have the standard field stock on mineā€”the factory Benelli tube doesn't fit, so you definitely need to swap over to the included tube.

Could you share which exact spots on the handguards you had to modify? Iā€™ve been messing around with mine for hours and can't quite pinpoint where material needs to be shaved down to fit properly. Thanks.
 
Mgver said:
Just got my hands on a set! Mine didn't come with the nut for the recoil tube inside the stock, but a locknut and washer solved that easily.

I also have the standard field stock on mineā€”the factory Benelli tube doesn't fit, so you definitely need to swap over to the included tube.

Could you share which exact spots on the handguards you had to modify? Iā€™ve been messing around with mine for hours and can't quite pinpoint where material needs to be shaved down to fit properly. Thanks.
Click to expand...

I put mine on a little over 3 years ago and my memory is a little fuzzy but I want to say it was at the front where it sits under the ferrule on the barrel lug.
 
polkey said:
I put mine on a little over 3 years ago and my memory is a little fuzzy but I want to say it was at the front where it sits under the ferrule on the barrel lug.
Click to expand...
Thanks for the reply I feel as though that is where my issue is as well.
 
Thats a great idea, I always found that 'for myself" extended pistol grips (other then on a normal wooded stock) had a very un-natural feel, being right handed it always felt that my right arm was hanging somewhere in space compared to the way I normally hold a rifle and consequently my ability to shoot accurately was always compromised, even shooting off a bench it never felt right.

Wood to me has so much more appeal too.

Thanks for sharing
polkey said:
This is what I put on my Benelli, took a little bit of fitting.
https://marstar.ca/product/impact-r4-wood-stock-and-handguard/

View attachment 1139047
Click to expand...
 
You must log in or register to reply here.
Back
Top Bottom