Looking for DPMS LR-308 16" Free Floating forend
- Thread starter LEFTOVER_MAYO
- Start date
Both of these will work - one is keymod and the other one is MLOK - they both have Picatinny at the 12 o'clock position and individual Picatinny rail pieces can be added to the 6'oclock position - both are compatible with the DPMS LR-308 platform
Fortis Keymod SWITCH 308 Rail (15-Inch)
SLR Rifleworks 308H Solo Ultra Lite Hand Guard - M-LOK
Fortis Keymod SWITCH 308 Rail (15-Inch)
SLR Rifleworks 308H Solo Ultra Lite Hand Guard - M-LOK
Just remember that DPMS made two versions....the original "high " profile and the newer "low profile"
Here is how you tell
https://troyind.com/sites/troyind.com/files/rtc-attachments/DPMS_RECEIVERS_COMPARE.pdf
DMPS changed from high to low in about 2009 -2010 .
Problem is many of the DPMS style ( vs Armalite ) upper receivers on the market such as the very common Aero Precison M5 308 uses the high ( they didn't follow DMPS change 0
As a result, there are two versions of DPMS compatible handguns . Some companies such as MI make both
Some companies such as Centurion Arms , Fortis etc only makes high .
BTW it you can physically install either you will have the obvious problem with having step in height from receiver to top of hand guard
Here is how you tell
https://troyind.com/sites/troyind.com/files/rtc-attachments/DPMS_RECEIVERS_COMPARE.pdf
DMPS changed from high to low in about 2009 -2010 .
Problem is many of the DPMS style ( vs Armalite ) upper receivers on the market such as the very common Aero Precison M5 308 uses the high ( they didn't follow DMPS change 0
As a result, there are two versions of DPMS compatible handguns . Some companies such as MI make both
Some companies such as Centurion Arms , Fortis etc only makes high .
BTW it you can physically install either you will have the obvious problem with having step in height from receiver to top of hand guard
