Looking for my first Long Range rifle help….700 5r milspec vs….a few

Since this is your first precision rifle, I will humbly suggest you follow a similar path to what I did.

First, pick up a SPS Tac in 308. Play with it for a season. The scope isn't terribly important - this isn't going to be your last scope.
Next, replace the trigger. Holy balls, your groups will close up.
Next, replace the stock. Not a holy balls thing, but you will enjoy the feel of it a lot better.
Time to replace the scope! I went with a SIII 10-50, it's a great scope, but I am not shooting the private bits of a flea at 1000 yards. If I hard to start over, I might go with a fixed 10x, or maybe a 5-25 Nightforce mentioned earlier in this thread.
Finally, replace the barrel.

At some point in there, hopefully you started reloading and experimenting with different bullets and charges. By the time you're done with all this, you have only the receiver and bolt left. You know what you like, and what you don't. Either keep and/or modify the rifle, or buy something like an ATRS custom job, or a PGW Coyote.

The reason you want to do this is to learn. You'll learn a lot more fixing up a decent but not great rifle, than just buying a 7k$ rifle. Kind of like fixing up an old car vs buying a BMW.

The Rem700 platform is great because of all of the aftermarket support you have, lots of choices. If you don't want to modify your rifle, Savage makes some nice target rifles as well that are supposed to be better out of the box, in a similar price range (little more $).

Have fun!
^^^^ what he said!
 
The barrel will be the single biggest contributor to precision...why recommend doing it last? If it was me and I was limited on funds it would be a used savage with a top bolt release and a laminate stock (easy to bed). And a good prefit shilen sis match or benchmark. If I had more funds then yeah the 700 would make sense, probably buy one that's been trued up and has a match barrel already on it.

It's not hard to be a better shooter than most factory rifles...contrary to what most people will say on here.
 
The barrel will be the single biggest contributor to precision...why recommend doing it last? If it was me and I was limited on funds it would be a used savage with a top bolt release and a laminate stock (easy to bed). And a good prefit shilen sis match or benchmark. If I had more funds then yeah the 700 would make sense, probably buy one that's been trued up and has a match barrel already on it.

It's not hard to be a better shooter than most factory rifles...contrary to what most people will say on here.

I would extend the thought and could argue that reloading may be equally as important as the barrel. I'll also second your notion, buy the Savage and with the significant savings buy better optics or a reloading setup.

I always question the necessity to "hit 1000", with modern rifles its not a hard goal to achieve, but then what? Sell the rifle and move to pistols? If you like the challenge you will likely want to continue to stretch the distances and you won't be able to do that consistently or cost effectively without reloading.

The key is to get into the game and put time behind the trigger, then you will know what you like and don't like. But why break the bank doing it?
 
I agree with that as well, reloading is just as important as the barrel for shooting long range. But will yield much better results from a match barrel obviously. Getting bullets to 1000 is easy and not much fun....putting bullets on small targets at 1000 however...very addicting.
 
700 is a great platform. I give respect where respect is due. I personally shoot heavily modified Winchester Model 70's, and recently I'm building up a Tikka T3 Tactical, .300 win mag, not a fan of all the plastic (or polymer, whatever it may be) but I'm working towards ridding it of such.

Keep us in the loop
 
I've shot side by side with plenty of Remmys but have had my hat handed to me on occasion only by the Savage FTR or Savage F Class rifle.

I have never seen any relatively low cost production rifle hold a candle to these two Savage rifles. Never.

There's lots or Remmy fan boys that will argue the point, but I never see them with gold medals at CFB Bordon.

At the heart of all rifles is the action and when you examine these two actions out of the stock, you will see clearly how little material the Remmy has between the ejection port and the magazine. The Savage has steel for about 300 degrees. That's more steel to keep the barrel from sagging and that reducing barrel harmonics when the rifle is fired. This is not brand bias, it's a mechanical fact.

I've seen a few Savage shooters embarrass guys with $5000 rifles. Never seen $1200 remmy guys do it.

side by side, my money is on the savage. ... and I shoot a tricked out remmy. it was money badly spent. There's only so much you can do with it before you realize the action is the weak link. Savage has the advantage from the start.

if you're just looking for minute of deer, it wont matter. If you want to shoot long range well, it sure does.
 
Last edited:
Hey guys !!!!! I am looking for my first precision rifle… I have milserps but looking for accuracy up to 1000… I have found the a few rifles that look good in hand and online but how do they all shoot at 600-800-1000 yards…

Rem 700 5r milspec $ 1100
Rem 700 target tactical $1700
SSG 3000 $1800
Savage #10 models $800 and up


How is the accuracy compare ? Is it worth it to get the 700 5r and do upgrades as the years go on ?


Thanks guys !!!!!


Hi there,

Can I ask where you found the 5r milspec for $1100? Everything I've seen is closer to $1400.

Thanks.
 
I have had a pretty bad adventure with a Remington Target Tactical.....would not recommend.

http://www.canadiangunnutz.com/forum/showthread.php/1158843-Remington-700-Target-Tactical-Loose-Bolts-Unable-to-Feed

In the end, I went with a Remington 700P + Cadex Chassis. I am very happy now.
 
Didn't want to start a new thread, so I'm posting in an existing one.
Do any of the Remington 700's in 7mm Rem Mag or .300 Win Mag, come with a threaded barrel from the factory?
 
Back
Top Bottom