Looking for value on a Sidelock Husqvarna Shotgun

KC

CGN Regular
Rating - 99%
97   1   0
Hi folks,

I have a sidelock Husqvarna shotgun (model 300) that I'm looking to establish a value on. I know sidelocks can be pricey over boxlocks and though I feel I've owned various configurations, gauges, grades, and so-on, I'm a little stumped on a value for this piece.

What I know is: LOP is 17 3/4" and barrels are 29 1/2"(I know, I'm 6' 2" and perfect if I'm shooting ready / not gun down, but feel it's for someone a bit taller, or with longer arms - my sons are 6' 4" so fits them).

> What I found on the web is they only made 300 of the model, maybe why the model # is 300? ;)
> Believe Sauer made and engraved the action
> Barrels are stated as Swedish Special steel 75cm
> Listed as Fine Grade (it has a nice chunk of wood on it free of any cracks, splinter forend is a little bumped up a bit but no cracks)
> Made between 1905-1917
> 12 gauge but chambers are 2.5"

It's a very nice balance piece for sure that would rate as good. Bores would be very good and wood has been refinished.

Here are some pics though really don't do the piece justice with my pic taking skills ;):

126OcBz.jpg

OR14uZV.jpg

SGwhzvg.jpg

wOYDLec.jpg

AiqSzLM.jpg

AUIQcJf.jpg

6c6rzh1.jpg

5SpY0mb.jpg
 
Last edited:
Husky sidelock actions were made by Sauer. Husky bought a large whack of them around 1903 when Sauer decided to stop making sidelocks at the lower end. Husky provided the barrels, the finishing, stocking etc.

There are two sizes of Sauer/Husky actions. I don't know if Husky got any of the small actions. Quick way to determine is weigh the gun. Assuming 28" ish barrels, it will either be in the 6.25 to 6.5 pound range or it will be up around and over 7 pounds.

Given the small number of Husky sidelocks our there (Ashcroft has cornered the market LOL) value is a bit dependent on a few things, one of which is which size you have. Quickest way to determine is to weigh the gun. It also matters what the barrel length is and what the chokes are.

Not well know in the market place because of so few. There aren't many Sauers either. Give us a barrel length and weight and I'll take a stab.
 
A multi year, almost multi decade analysis of realized auction prices for thousands of vintage SxS in the US would set a range of value on this gun WERE IT IN THE US, of between $700 and $1000 usd. I'm assuming it works as it is supposed, does not have debilitating pitting in the barrels and barrel walls haven't been honed to the thickness of tissue paper.

The Canadian market is always lower than the US but by how much it's hard to say. Variable based on the gun, the configuration and current exchange. I think this one fits at the higher end of my range so I'm saying $900 to $1100 Cdn. Were it a Sauer it would price higher, especially in the US. Brand name counts. Husky doesn't have the cachet pre war Sauers do.
 
Thanks again for your input. I did add the pictures of the inletting with the locks out. Also, barrels are 29 1/2", LOP 18" and feels like the weight is 7 lbs if more maybe an ounce or two. Sounds like the thing with a CIL Anschutz versus an Anschutz. ;)
 
Has the stock been varnished or? It looks very glossy and doesn't appear to match the condition of the rest of the gun. The checkering also looks glossed over from what the pics show but maybe it's just the pics.
 
I think that, in the condition illustrated by the pictures, that any collectible value is gone.
Pretty well all finish is gone from the metal, screws are damaged, pits on the barrels. The butt is likely a replacement, and the finish is horrible. There are chips out of the edges of the forend, and the edges of the lock inletting looks rough.
It would be an unecnomic enterprise to try to restore this gun.
Rare as it might be, I can't see it selling for more than a rough shooting gun, and there's a lot of economical 12 bore doubles on the market.
It pains me to say this, when I see the beautiful gun that Ashcroft has shown.
 
Has the stock been varnished or? It looks very glossy and doesn't appear to match the condition of the rest of the gun. The checkering also looks glossed over from what the pics show but maybe it's just the pics.

It’s a restock Brian. And clearly a recent gloss finish.

Mr C J Dawe has begun restocking my Sauer sidelock and even without the wood blank a proper restocking is at least twice the value of the subject Husky.
 
I believe that I can add to the small trove of common knowledge of these guns thanks to the exhaustive research done by the previous owner of my gun. This gentleman, a long time personal friend of mine bought this gun (79032) at Wholesale Sports, Calgary in 1998. It was on consignment and they declined to provide a contact for the consignor when requested, so that is as far back as he was able to trace it’s Canadian history. He knew it was different than anything he had seen before and started what turned out to be a couple of years of far flung research into his new prize. He was always a curious and meticulously thorough individual and his file that came with my gun is about an inch thick, numbering many pages of articles, receipts, correspondence and documents. Fizzling out quickly in Canada, his research quickly led him to Sweden where he was able to get the known facts about the 300 series of Husqvarna sidelocks through correspondence with noted Swedish firearms historian and author Frederik Franzen ( author of 1992 Double Gun Journal Vol 3 #8 article outlining Husqvarna double rifles and shotguns) , researcher and advanced collector Carl Ryd and Husqvarna collector and historians Arne Ohlsson and Holger Ytterfelt. In general….
- The 300 series sidelock was Husqvarna’s best gun, made to answer the domestic demand for a Swedish made best gun rather than purchasing German, Austrian or British guns.
- To make these guns which were all hand made, Husqvarna assembled a special team of about a dozen master gunsmiths whose only task was to build these guns.
- They were made from 1905-1917 when the program was shut down due to decreased demand as a result of WW1 and the flu epidemic and also because their master gunmakers were now too few in number to continue the program.
- They were all made to the highest standards in three ascending grades of finish, the 300, 301 and the 301 LX. The grade is stamped on the water table.
- During the initial ramp up of the program (4-5 years) unfinished actions and then only basic action forgings were purchased from various German manufacturers including Sauer and others. By 1910 these guns were completely made in house.
- As noted, total production in all grades numbered 300.
- These guns were never sold in North America, the bulk being sold domestically in Sweden with others going to Germany, Austria, Denmark, Norway and a few to Finland and Belgium.
Regarding my gun specifically, it was appraised through photos and detailed description in 1999 by Arne Ohlsson at a value of 20,000 Swedish Crowns in Sweden ( about $3,500 Can dollars at this time ) , Canadian or American value unknown. He commented that they are very scarce and highly sought in Sweden and he was very surprised to find out about this gun in Canada, he thought that it may be the only one in North America. I now know it isn’t even the only one in Canada, there are at least two! And about two years ago there was a 301 LX advertised at William Larkin Moore in Scottsdale Ariz., it sold quickly. When my friend first showed up at our club with what is now my gun I was instantly in love, notwithstanding my long love affair with English doubles. He let me try it out and oh my, it fit like it was made for me and I had to have it. He wouldn’t sell! I tried repeatedly to buy this gun over the next 20+ years, no dice. A couple of years ago he passed away, the gun came to me and it has a new appreciative home. I’m slowly moving my treasures like this along to new select homes, this one will go too and it won’t be easy.
There is other information included regarding production numbers, names of the various specialist gunsmiths who made these fine guns, some of which were made for the Swedish royal family, markings and features.
In Canada Husqvarna has long been known for their outstanding hunting rifles which were sold here in quantity after WW2 until Husqvarna discontinued rifle production (in the 1980’s?) and of course for a steady stream of Mauser actioned military surplus rifles but Husqvarna shotguns were almost unknown here until about 10? years ago. This followed major changes in the firearm laws in Sweden and several other European countries limiting the number of firearms that an owner could have and resulted in a massive sell off of the less desirable pieces as owners pared their collections. These showed up in large quantities at outlets like Tradex and others at very attractive prices. These shotguns, including Husqvarnas, that have been coming were well designed, well made, mostly heavily used and well worn and are the only Husqvarna shotguns most of us have any familiarity with.
 
Ashcroft, that's a bunch of interesting stuff. I'm curious if you know if Husqvarna made the action in two sizes, as Sauer did. And I'd be interested in your gun's weight and barrel length.

I often find myself drawn to makers outside the norm. Husqvarna is one of the makers that interest me, although mostly I have targeted the 310 boxlock.

My information suggests there were 300 of the 300 produced, 47 of the 301 and 15 of the 301 LYX.

Concurrently they also made the 200 (300 produced) and the 201 (300 produced). All production of sidelocks ceased by 1918
 
If either KC or Ashcroft care to, if you send me your serial number and very clear photos of the barrels flats, any markings ahead of the barrel flats and the action flats, I can give you a production year and likely the name of the gentleman who finished your gun.

My 310 AS was finished by Claes Johansson. Fun fact! :d
 
Ashcroft, that's a bunch of interesting stuff. I'm curious if you know if Husqvarna made the action in two sizes, as Sauer did. And I'd be interested in your gun's weight and barrel length.

I often find myself drawn to makers outside the norm. Husqvarna is one of the makers that interest me, although mostly I have targeted the 310 boxlock.

My information suggests there were 300 of the 300 produced, 47 of the 301 and 15 of the 301 LYX.

Concurrently they also made the 200 (300 produced) and the 201 (300 produced). All production of sidelocks ceased by 1918

Canvasback, the production figures that you have talley with the information that came from Sweden. There was no mention of different action sizes or gauges. Of interest, there is a swastika stamped on the barrel flats of my gun and my friend inquired whether this gun might have been so marked by the Nazis in WW2, perhaps outside Sweden because Sweden was supposedly neutral during the war. The reply was a good chuckle, basically the swastika is an old symbol in use for centuries before the Nazis came along and Husqvarna used it as a trademark for their best barrel steel.
My gun has 75 cm barrels (29 1/2”) and it weighs 6 lb, 13 oz with oval pistol grip, checkered on the base and a grooved horn butt plate. Disk set strikers, cocking indicators, selective ejectors, 8 pin fine sidelocks, it has all the bells and whistles. The most fascinating thing is that the case colours are at about 100% with most of the protective varnish still intact and the striking marks from the original barrel fitting are still very prominent on the back faces of the barrels. This gun is in near new condition.
 
Good to know my search for a husky sidelock just became mission impossible. I have 2 husqvarna hammer guns and enjoy them both especially my model 51 which im debating having sent out for re case color hardening
 
Back
Top Bottom