Looking to start reloading.

I just started reloading 44mag and 44 special. I got an RCBS rock chucker supreme kit for 360, shell holder, powder stand, powder trickler, impact bullet puller and tumbler (used) for another 240.
So start up for me was about $570.

Loading with Hornady bullets (about $47 and $42 per 100) my cost per round is about $0.67 for 44m and $0.63 for 44s.

The kit came with a Nosler reloading book and there's lots of resources out there. There's a Facebook group call the reloading room with over 30k members. It's a handy group for all sorts of questions.
 
Hi. Smokey123 here. When you eventually care about accuracy and group size, follow these tips. Slug your barrel to learn bullet size, use same make of brass, measure O.A.L. of brass, clean and deburr primer pocket, ensure bullets are all same weight (within .01/.02). There are more tips but lost in my head(ask forum). If you go to gun shows and see a really good deal on handloaded ammo, buy it but don't use it in your firearm. Pull all of it and use brass and bullets. Dump powder and de-prime. You don't want to acc. blow up your firearm or yourself All I can think of right now. Finally, ask forum if they concur. Good luck. Smokey123
 
K.s.47 said:
Hey guys I've been shooting for a while now and I'm thinking it would be worth it to start reloading. I don't have a lot of money to spend so I was wondering if you guys could make a short list of all the things I would need to start so I can look up the prices. I'm looking to reload .308 and maybe some .45 in the future. I would probably go for a single stage because it's cheap is people say it's good to start on. Thanks for the help.
Click to expand...

The Lee turret press can be used as a single stage, but it can also produce about 150-250 rounds of pistol per hour. I've done tens of thousands of rounds on mine and haven't had a single issue. I believe they're also very cheap. I highly recommend staying away from the Dillon products, after trying to use them myself, and seeing the people having constant issues they are not something I would recommend. I've been reloading for close to 15 years now and owned about 9 presses; Hornady, Dillon, and Lee. I think you can get into reloading 308 for a good price, just make sure you save your brass!

EDIT: The first step is to download a book on reloading, the Lyman manual isn't bad.
 
K.s.47 said:
Hey guys I've been shooting for a while now and I'm thinking it would be worth it to start reloading. I don't have a lot of money to spend so I was wondering if you guys could make a short list of all the things I would need to start so I can look up the prices. I'm looking to reload .308 and maybe some .45 in the future. I would probably go for a single stage because it's cheap is people say it's good to start on. Thanks for the help.
Click to expand...

This sounds like it might be helpful for you.

https://www.canadiangunnutz.com/for...started-reloading-with-the-Lee-Loader-Classic
 
Right now Lee is offering their 50th anniversary kit for less than two hundred bucks, this will give you everything you need to get started, available from numerous retailers, X Reload, Cabelas, Amazon etc. and many dealers listed on this site. All you need in addition is a set of dies and components. Read as much as you can, get the Hornady and Lyman reloading manuals would be my two top choices, youtube is excellent as well vast amount of information there. I've been a hand loader for almost 50 years and is a fabulous hobby into itself. You won't be saving any money but you will be able to shoot a lot more for the same price your spending on factory ammo. Factory ammo is an over priced ripoff. Shop around for your components, prices vary considerably. Start small and work into it, as you become more knowledgeable you will add and upgrade accordingly. One tip, Canadian Tire has the best prices on powder currently. Enjoy, you won't regret getting into reloading!
 
Find a local buddy who reloads and walk you through the process before you buy. Its much easier to make a purchase when you fully understand what you are buying and what is needed.
 
Lots of videos on YouTube as well covering reloading. Some times actually seeing the process helps rather than just reading about it.

Reloading adds a whole dimension to the hobby of shooting.

Cardinal rule is to check and double check everything. Don't reload if you have limited time or preoccupied with other things in your life. Reloading requires your full and undivided attention at all times. If your not a 'detail' kind of person I would not recommend it.
 
I have the Lee classic set, I really like it, and it was cheap, has everything you need and best of all, it has nice, clear instructions. I also have a copy of the Reloaders Bible. No specific recipes but good instruction and very indepth look at reloading.
 
1. Grab a single stage press to start, Lee Classic Cast is what I'll recommend here.
2. Invest in the best scale you can afford if going the digital route.
3. Get yourself at least three reloading manuals.
4. Read "The ABCs of Reloading." Its an older book, but truly a must read. A fellow CGN'r sent me a copy for free when I started reloading, I read it cover to cover three times, then I passed it on to another new reloader.
5. If you are unsure about a step/procedure/method, ASK! There are some incredibly knowledgeable folks on this forum who will help you. Don't be swayed by the odd idiot who #####es because the question has been asked before, etc. The knowledge base on here is astounding and most are extremely helpful.
6. Take your time and pay attention to detail... every detail.
7. Leave the beers/scotch/etc until the reloading session is done. I love drinking beer, but not at the risk of messing something up and blowing my face off...

There is so much more to say/suggest, but I won't go on all night. Read, learn, ask and do it!
 
Budget Shooter Supply has the best prices around, always check there before purchasing elsewhere!

It really is amazing how many things you learn as you go... I bought two reloading manuals and consult both before doing anything. It does become a separate hobby on its own!
 
You must log in or register to reply here.
Back
Top Bottom