Loooking for 300 WSM 200 grain load

[Highwind]

Looking at doing a 300 WSM load with 200 grain Sierre BT load with various powder options. I know that RL 19 is supposed to be good - but it's hard to locate this powder. What are the alternative...?

 

[hookedonblacktail]

I loaded that bullet and imr 4831 gave the best accuracy, velocity around 2750.

 

[1899]

I would try IMR or H4350 with that combo. Both of those are available now and are good powders.

 

[woodchopper]

I loaded that bullet and imr 4831 gave the best accuracy, velocity around 2750.

oops.... missed that its a 300WSM

I posted my 300WM data.

 

[RL-300mag]

IMR-4831 & imr-4350 are good powder's , I did see a little better results with IMR-7828 in the 300wsm with 200gr pill's.

 

[Highwind]

Thanks for all your responses so far your information is much appreciated...!

This afternoon I picked up my Sierre 200 grainers and picked up some IMR 4350 powder and Primers. I was going to try CCI 250 Primers but was only able to obtain Winchester Large Rifle Primers for Magnum Rifle Loads. So that gives me an opportunity to try some re-loads. I have a lot of Federal brass that has been shot in the rifle that I'll be loading for. So for now - those will have to do. My next acquisitions will be some of the rest of the loading equipment that I need and will do so over the next week or so. If there are any suggestions as to what is most reliable / affordable and accessible I would appreciate any suggestions that some of you may offer.