loose trigger pin on CZ shadow 1

[Fastestmanalive]

I noticed after 150 rounds at the range last Saturday that the trigger pin on my CZ Shadow 1 was almost out. First time this happens and the gun has over 1000 rounds shot. I never tried to get that pin out when cleaning. Now it seems loose and just with a pen, you can push it out. One side of the pin is flared, so not meant to be pulled. Anybody experienced this ? Should I get my baby to the gunsmith ?

I clean my handguns after every trip at the range. Clean the slide, the barrel, the mag well, etc. I never pulled the extractor, firing pin, hammer, etc. How often to you guys do a complete tear down of you gun to clean ?

Thanks guys.

 

[silverfoxdj]

I field strip and clean at approximately 500 rounds

 

[ekp]

Get new pin and put it instead. New style pins are not required to be flared, they are pretty tight.

 

[gnmontey]

If it's anything like a CZ85C the trigger pins get flared (staked) when installed. No need to go to a gunsmith to fix, unless of course you don't have an appropriate pin punch to re-flare it with.

M