lyman moulds in Canada

[pal]

where i can buy Lyman #427666 moulds in Canada

 

[leebuilder]

Try Roy at dragon bullet lube, top notch. Try the EE too, you never know.

 

[pjs]

I bought one a few weeks ago from Optics Planet on ebay. So far it has not proved very accurate in my 44/40. I need to try a 427098. It is the old Winchester style bullet but lacks a crimp groove.
Pete

 

[freire]

Plus 1 for dragon lube.

 

[pal]

Thanks guys, pjs if you don't like your mould, let me know

 

[colt1851]

You can get direct from Lyman. I found the 427666 better than the 427098.

 

[Huntsman]

Ellwood Epps in Orillia Ont. CGN sponsor.
I was just there. Not sure about your mould but they have a fairly good selection of Lyman, RCBS and Lee.
They also have Luber sizer dies, Top punches etc
I saved a bit of money buying through them as opposed to ordering directly from Lyman too.

 

[coreyd]

^^^^^^ What he said. I buy a lot of this kind of stuff from Epps.

 

[Bassmaster]

To understand Epps, you have to actually visit the store. Their website doesn't do any justice for the amount of 'cool' this place has. I live 4 hours away but always make a point to visit them 2 or 3 times a year.....not to mention the extremely accurate weather station....sorry OP for the de-rail.

 

[Snider shooter]

The places I have found most of my moulds has been at gun shows or private sales. Brian densmore has ordered a few new ones also. 40 some Lyman moulds so far. 94 in total. If I want to shoot I have bullets to shoot or lead to make them.

 

[hatman1793]

Dragon Lube didn't have 2 common LEE molds when I queried them. I'm sure they try hard but they are like any other retailer: they stock & sell what reloaders want.

Take a look at LEE molds. There might be a suitable mold for your needs....

 

[dthunter]

I know this isnt a canadian source, but “Accurate bullet moulds” in the states will have nearly anything you need. And they can custom make the mould to be +/- 1 or 2 thousandths of an inch on any dimension you need. This way they can custom make a mould to you rifle/pistols exact bore diameter. Real easy to deal with and prompt service.

 

[10x]

Take a close look at NOE molds - extremely high quality at very reasonable prices, - excellent products!

 

[sail32]

There is a lot of bullet discussion over at the CasCity forum.

Check out Accurate Molds, catalogue page 13.

 

[Huntsman]

Take a close look at NOE molds - extremely high quality at very reasonable prices, - excellent products!

I 2nd NOE molds for quality and cost.