I went with the Trijicon RM07. It's the Adjustable LED (so it uses CR2032 and last year) 6.5 MOA. Some people prefer the smaller 3.25 MOA dot, but I have had no issues at all with the larger one, using it between 3 - 50 yards.
No complaints so far.
M&p 9 + rds ?
- Thread starter Brianma65
- Start date
I went with the Trijicon RM07. It's the Adjustable LED (so it uses CR2032 and last year) 6.5 MOA. Some people prefer the smaller 3.25 MOA dot, but I have had no issues at all with the larger one, using it between 3 - 50 yards.
No complaints so far.
wayupnorth
CGN Ultra frequent flyer
- Location
- Northern Alberta
i went with the deltapoint and the big dot (eyes are getting older)
the delta point seems to be made for the CORE, its the one S&W recommends or at least pushes more and i know you can 100% co-witness with the irons using it, some other brands you cant.
the delta point seems to be made for the CORE, its the one S&W recommends or at least pushes more and i know you can 100% co-witness with the irons using it, some other brands you cant.
- Location
- Burlington
I had Casey at Tactical Ordinance mill my slide out on my standard M&P for my DeltaPoint. It sits nice and low.
twoicebergs
Regular
I find that the 3.5 dot is large enough, especially on the high light setting. The co-witness really helps with target and red dot acquisition. The higher sights and cut make the CORE an easy pick.
There was one for sale on the EE last week. Look there. They do come up every so often.
Take Care
Bob
onetwentyish
CGN Ultra frequent flyer
- Location
- East Central AB (AKA Northern Texas)
Dlask will machine the slide for a Red Dot, cost is approx $180
onetwentyish
CGN Ultra frequent flyer
- Location
- East Central AB (AKA Northern Texas)
My RMR is up for sale right now. Its the Dual Illuminated model, BNIB.
For my M&P I just added the Trijicon night sights...helps my aging eyes line up the sights quickly...big improvement over the stock ones. But if you are committed to the RDS, I agree with the CORE...purpose built for optics. Got to try one a couple weeks ago - very nice.
I'm more interested in tighter groups as I only punch paper., thought the RDS would be the way to go. I just find the white dot factory sights are ok , but would like some kinda target sights maybe. Then again it's not overly important (tight groups) , I just like to shoot, and tinker with the gun.
wayupnorth
CGN Ultra frequent flyer
- Location
- Northern Alberta
do they ship to Canada?
