M14 bipod stud

[Light Infantry]

Anyone in Canada sell these bipod studs for the m14 rifle?

I know Brownells in the USA sells this one: But i don't have a ton of stuff to order and the shipping etc will cost more than the part. This is a Harris part.

Here is another type:

 

[Nachoninja]

I ordered the Brownells one. It's too thick to fit in my wooden or synthetic stock. The wooden one would have to be ground very thin to allow it to work, something I don't want to do.

 

[Beater]

just put in the knurelled nut that comes in a normal stud setup

 

[Light Infantry]

just put in the knurelled nut that comes in a normal stud setup

You mean with the wood screw threads? Not enough meat in the wood as far as I am concerned.

 

[can14]

Buy the US clamp on tripod made in Taiwan.

 

[notsorichguy]

Y’all do know there’s a reason that hole is there, right?

Not a big deal if you’re going to be cleaning fairly regularly, but “stuff” does come outta that hole in the stock with extended use....

Tree line sells a kit to replace one of your rivets (in the front sling plate) with a bipod stud. It doesn’t work for a Harris style bipod. There are also several options for a front rail section in the front sling location. Some come with a sling loop, some are designed to be installed over the existing plate.

Another option I’ve seen in placing the swivel nubbin in the fore end just far enough back from the front loop, so that a standard Harris stule bipod doesn’t interfere with the front loop....