Bought this shotgun a while back and it came disassembled I have lubricated the gun and have put it together properly (to the best of my knowledge as there is basically no info on this shotgun anywhere) and I have FTE issues 70% of the time I have taken it apart and reassembled cleaned ect but still can't figure it out.......anyone have any suggestions or own an m1000 that could possibly give me some insight?
Mag fed norinco m1000 FTE issues
- Thread starter complexrhyme
- Start date
Turkinator
CGN frequent flyer
- Location
- Onterrible
***supposedly*** the shotgun is modeled after the Beretta A300? (with the main difference being it takes irreplaceable unique mags)
take a look at this assembly video to see if it resembles your shotgun
When you say FTE do you mean failure to eject or failure to extract? Its an acronym that some use both ways. Since there is no reference material for this shotgun maybe everyone can help diagnose the problem.
When you say FTE do you mean failure to eject or failure to extract? Its an acronym that some use both ways. Since there is no reference material for this shotgun maybe everyone can help diagnose the problem.
that shotgun is similar but assembled a bit different. I am having failure to eject issues and the casing will get caught partway in the ejection port. I have taken some pictures of the assembly process if that will help some people out but I think the issues lies with the crappy quality mags and it almost seems like the mag sits to high when its inserted. Does anyone else happen to own this gun ? I am also using Winchester value 2 3/4 shells and am will try a different brand next time
