mag wont lock into stag 10

RangerPark said:
I got one in the mail. 17" hand guard over a 20 barrel. Completely unnecessary, but I can't wait to have it! Will be a nice finishing touch to my build.
Click to expand...

at the moment I think they are one of the best options for the AR10 I also bought the one with integral bipod for the same rifle in 6.5 don't like it
 
Beater said:
you know im feelin kinda dumb. ive built many many AR rifles but this receiver came assembled from stag took it out today and had a look. BOOM cant even see the stud in the treads hardly. 4 full turns later its where it should be and latches/ unlatches any mag I have now. always check the simple things first hey thanks cr5
Click to expand...

You're welcome.
I like to start with the basics and work up to the complicated fixes later if the simple one doesn't work, lol.
 
RangerPark said:
Mine locked in fine but would be low, the BCG would ride on top of the rounds sometimes. I polished the feed lips and it fixed the problem. Still not happy with the ASC mags though, the finish is terrible and is peeling off in several places, and that's just from range and bench use. I prefer CPD mags and have 6 on the way from the EE. CPD are harder to find in the 10 round XCR variant, can't think of a dealer that has them in stock right now.
Click to expand...

What concerns me with these mags is that the finish is rubbing off where it says it is a 10 round pistol mag....and I dont see any laser etching underneath :s
 
It's the mag release that is the issue, most solved it with a nobit or some name similar Ambi latch.
I've had no issues with any mag but the elanders, it worked perfect with the dlms mags, the 10 round pistols, pmags and the kac SR-25 mag I have
 
Fixed mine with a magazine catch swap, I had a Battle Arms Development one in there to start, and not only after the first round would it pop out but also if you just grabbed it and wiggled it

Anyways I had a titanium one from brownells that I bought for another build, installed that and it fixed the issue completely
 
You must log in or register to reply here.
Back
Top Bottom