thatmikeguy
Regular
- Location
- Steinbach, Manitoba
back in june i had been seeking help on a feeding issue for my 308 PH. well for those who may have the same issue, i have found a solution.
i found that the spring in the magazine sits too far forward and as a result, the rear end of the cartridge hangs down and the bolt passes right over top. the solution: i moved the spring right to the back of the follower and re-drilled and riveted the sring in place and voila!! the clip works. and the fix costs nothing.(if you have rivets already)
i found that the spring in the magazine sits too far forward and as a result, the rear end of the cartridge hangs down and the bolt passes right over top. the solution: i moved the spring right to the back of the follower and re-drilled and riveted the sring in place and voila!! the clip works. and the fix costs nothing.(if you have rivets already)
