P0WERWAGON
CGN Ultra frequent flyer
- Location
- burnaby BC كافر
and then................
Make your own CQB type stock for your M1A/M14 *see post 14
- Thread starter 45ACPKING
- Start date
and then................
And then..... I nearly cut my finger off so all projects are on hold.
That and I wasn't too pleased to see M14.ca's interuption in this thread. Although it sure shows their true colours as I've been saying all along.
Anyhow, when my finger is up to the task, I'll consider finishing this thread. Sorry guys
That and I wasn't too pleased to see M14.ca's interuption in this thread. Although it sure shows their true colours as I've been saying all along.
Anyhow, when my finger is up to the task, I'll consider finishing this thread. Sorry guys
I have rearly seen a post on M14 stocks where this guy hasn't popped in for some Troll marketing. Be it your posts Thomas, any post on VLTOR, Promag, Troy or SAGE. So sick of it!!
That being said, please do continue thomas! This is perfect for the M14 DIY'ers which Canada is full of!
I've got at least 6 weeks till physio. 2 fingers immobilized , index and middle on my right hand... And I'm right handed. It sux because I have a pile of projects on the go and my own custom composite, camo laminate stock for my hunting rifle to finish by mid august.... And that ain't gonna happen either
Oh well, good thing I'm retired and I have satellite TV
And then..... I nearly cut my finger off so all projects are on hold.
That and I wasn't too pleased to see M14.ca's interuption in this thread. Although it sure shows their true colours as I've been saying all along.
Anyhow, when my finger is up to the task, I'll consider finishing this thread. Sorry guys
That sucks, get well soon. We will be waiting patiently for the next installment when you are up to it.
Mark
My intention here is not to interrupt dialogue on the M14 rifle, this thread, or, this board. I thought my first post would be welcome information to those interested in a DIY project. I apologize if my initial post in this thread has offended you. I look forward as an end user myself to seeing the results of your DIY project.
Considering the issues I've personally had with you and your collaborator/consultant LiesRus2000 and his rants on forums I don't even go to anymore.... I think your reason for posting in this thread is nothing more than trying to encourage more of the same drama you guys have caused me over the past few years. You can dress it up however you want, but I've always seen past the smoke and mirrors and snake-oil advertising.
No need for rebuttal frank, nobody cares, and if liesRus2000 is developing an adaptor for the chinese stock... Well now, another fine example of using someone else's idea and calling it your own LOL it's getting comical.
My advise is, stay out of this thread as it won't do your business rep any service.
P0WERWAGON
CGN Ultra frequent flyer
- Location
- burnaby BC كافر
and there is the reason i will never buy any of their products. every god dam post is the same, that is a good product, but ours is better. in almost every thread.
- Location
- As east as it gets
"I've got at least 6 weeks till physio. 2 fingers immobilized , index and middle on my right hand... And I'm right handed. It sux because I have a pile of projects on the go and my own custom composite, camo laminate stock for my hunting rifle to finish by mid august.... And that ain't gonna happen either
Oh well, good thing I'm retired and I have satellite TV"
Hope you feel better soon. I was pumped to see how this worked out. Its like watching your favorite show, as soon as it gets to the good part they go to hiatus for months . I'll be patienly waiting for the next installment.
Oh well, good thing I'm retired and I have satellite TV"
Hope you feel better soon. I was pumped to see how this worked out. Its like watching your favorite show, as soon as it gets to the good part they go to hiatus for months
. I'll be patienly waiting for the next installment.
Mauser GDog
CGN frequent flyer
It's called tact, or in your case, tactless.
And then..... I nearly cut my finger off so all projects are on hold.
That and I wasn't too pleased to see M14.ca's interuption in this thread. Although it sure shows their true colours as I've been saying all along.
Anyhow, when my finger is up to the task, I'll consider finishing this thread. Sorry guys
#### dude, take care of yourself. Hope you get better soon.
I'll be back on this project in a week and will photograph each step. I may not be around as much online the next month or two but will complete this how to and update thread as each major step is performed.
Seems stormwerkz has expanded their adaptor line and I have confirmed the stock adaptor used in this mod still has same part #.
It is stormwerkz part number SA-180-01 or AR180 Type 1 adaptor (50.00 usd)
I just spoke with Josh at stormwerkz on the phone (best way to order) this morning and he welcomes our business
Stay tuned ....
Seems stormwerkz has expanded their adaptor line and I have confirmed the stock adaptor used in this mod still has same part #.
It is stormwerkz part number SA-180-01 or AR180 Type 1 adaptor (50.00 usd)
I just spoke with Josh at stormwerkz on the phone (best way to order) this morning and he welcomes our business
Stay tuned ....
JDForBrkFst
CGN frequent flyer
- Location
- Roughly North Central AB
Mr. Castiglione, do you have any pictures of the stock with the action in it? Looks like a beauty, I just so happen to have a plastic norc stock just sitting around, dare I?
Glad to hear you're back. I hope you're finger has healed well.
I'm looking forward to this.
I'm looking forward to this.
Finger(s) are comin along. My trigger finger, sadly will never be the same. Surgeon says maybe in a couple years of use. Can't bend tip at all and middle knuckle has about 40% movement and 10% strength.
Learning my trigger skills all over again with my middle finger.
Now that I've dispensed with the whining, the show begins tomorrow
