Mark Precision Optics

I was looking at the specs and the field of view seems brutal.
I'm guessing its measured in Meters and not feet. So .8' would be 30"
And for comparison the Burris FFII 6.5-20 is 18'@low 6'@high for 100 yds.
Anybody else see this?

Specifications 6-24x50 SWAT
Magnification 6x - 24x
Objective Diameter 50mm
Exit Pupil 2.08 - 8.33mm
Length 410mm
Tube Diameter 30mm
Eye Relief 85 - 90mm
Field of View at 100 yards 0.8' - 2.9 '
Material Aluminum Alloy
Illumination 11 Brightness Settings
Parallax 15 - Infinity
W/E Click Value 1/8 MOA
 
Its a standard Chinese scope, relabeled for whatever the company wants. Can find these scopes on Ebay for just under a hundred bucks. Optics will be ok, nothing special, gets blurry at high magnification, not much exit pupil at higher magnifications and there is sweet frig all for adjustment, usually only 30MOA vertical. Fitco sells the same scopes in Canada for 120-140 shipped with GST. see http://ww w.futong.com/sideparallax.html Personally I would not buy another one, have not been impressed with them.
 
Last edited:
Back
Top Bottom