Marstar's 1887s?

TOMBSTONE KID;
OUr first container of these due in Vancouver in about 10 days, must clear customs and move to our warehouse....
John
 
Much Obliged!!

while on the topic do you also expect to be receiving another order of your sold our Norinco Rifles at the same time (JW-21 .22 Lever, 22 KKW Trainer)?
 
They're here and have been posted on the Norinco Shotguns section of our site. I expect these will be quite the 'head turner' on the firing line this summer especially at Cowboy Action Shooting events.

Get 'em while we've got 'em!

- Peter
 
As an interesting note, I just noticed Numrich sells aftermarket wood made of black walnut which would vastly improve the mystery hardwood likely on these guns.

About $95 US per set.
 
A small note:

In an effort to minimize confusion between the Norinco YL-1897 (Winchester type pump gun) and the Norinco YL-1887 (Winchester type lever gun) we took the liberty of calling the latter the YL-1887L.

When ordering, please include the 'L' (for 'lever') to make doubly sure we know it's Browning's 1887 (YL-1887L) you want as opposed to his 1897 (YL-1897) shotgun design :cool:

Thanking you in advance,

- Peter
 
Thus far the wood on the 1887L (please remember the 'L' folks so we know you want a lever, not a pump) looks presentable. Better than we've seen on some guns. I haven't knocked one around so I can't tell you how hard/soft the stock is. No doubt it'll be received like every Norinco before it: some will like it, some won't, and many more won't care or will make wood refinishing/swapping a 'round tuit type winter project.'

Hope this helps,

- Peter
 
Back
Top Bottom