Cross Industries
Expired Business Member
- Location
- BC
Hey fellow CGN members,
After a lengthy delay, we’re back, with updates! We anticipated being into production months ago, unfortunately we hit major hurdles in the injection moulding process. Previous release estimates were correlated with timelines provided by those looking after the moulding for us; who ended up being unable to execute to our standards.
After compounding issues and delays, we decided to make the considerable investment to bring all injection molding in house, while expanding our existing machine shop to set up a cutting edge Tool Room (the side of the shop that makes the moulds). This equipment was ordered last fall, and is now on our floor being installed.
From the design, to machining/mould making, to injection moulding, to packaging, we now have full control of every element - everything is being executed all within 4 walls in Abbotsford, BC. We are now truly 100% in house and along with full control of production, comes a better ability to speak to timelines.
We are working with a few Canadian distributors right now and expect that we will have an official release date by the end of June. We are aiming for an August / September 2018 release and our distributors will have access to plenty of inventory.
Over the next month, we will keep our Instagram page @crossindustries updated with a behind the scenes look at production as we ramp up to release.
In March we had attended IWA2018 in Nurnberg Germany, made great connections, and received some great feedback. The below trade show video was shot for our booth, and serves as a great teaser for what’s to come!
Thank you for your patience, we can't wait to get these mags in your hands and we’re looking forward to keeping you updated with timelines and content moving forward!
After a lengthy delay, we’re back, with updates! We anticipated being into production months ago, unfortunately we hit major hurdles in the injection moulding process. Previous release estimates were correlated with timelines provided by those looking after the moulding for us; who ended up being unable to execute to our standards.
After compounding issues and delays, we decided to make the considerable investment to bring all injection molding in house, while expanding our existing machine shop to set up a cutting edge Tool Room (the side of the shop that makes the moulds). This equipment was ordered last fall, and is now on our floor being installed.
From the design, to machining/mould making, to injection moulding, to packaging, we now have full control of every element - everything is being executed all within 4 walls in Abbotsford, BC. We are now truly 100% in house and along with full control of production, comes a better ability to speak to timelines.
We are working with a few Canadian distributors right now and expect that we will have an official release date by the end of June. We are aiming for an August / September 2018 release and our distributors will have access to plenty of inventory.
Over the next month, we will keep our Instagram page @crossindustries updated with a behind the scenes look at production as we ramp up to release.
In March we had attended IWA2018 in Nurnberg Germany, made great connections, and received some great feedback. The below trade show video was shot for our booth, and serves as a great teaser for what’s to come!
Thank you for your patience, we can't wait to get these mags in your hands and we’re looking forward to keeping you updated with timelines and content moving forward!
Last edited:
