MCS Shockwave Raptor Grip

badboybeeson

badboybeeson

CGN Ultra frequent flyer
Business Member
Rating - 97%
612   19   5
Location
East ontario
MCS Shockwave Raptor Grip

These are in production and shipping end of this month.
This is a pre order wirh free shipping.
There is around 40 or so out the 100 units we are making
Left avaliable.

We have many project this summer inc other MCS products so this will be the only run of these untill the fall.
https://sjhardware.com/mcs-shockwave-raptor-grip/
447556140_968609388602184_4500727307533864522_n__16111.jpg
447777839_968610105268779_4004825745070003040_n__19369.jpg
20240530_124622.jpg
 
No name said:
Will the mcs adapter for the speedfeed stock and regular stock be available soon?
Click to expand...

The issue with the speedfeed stock is this.

Speed Feed went bankrupt years ago.

I have access the the remaining mcs speedfeed stocks, but the but pad is no longer made and I can't get limbsaver to make new ones.

My only option is 3d print one.

And for what this is,going to cost I think that a 3d printed butt pad will take away from the quality of this project
 
badboybeeson said:
The issue with the speedfeed stock is this.
Speed Feed went bankrupt years ago.
I have access the the remaining mcs speedfeed stocks, but the but pad is no longer made and I can't get limbsaver to make new ones.
My only option is 3d print one.
And for what this is,going to cost I think that a 3d printed butt pad will take away from the quality of this project
Click to expand...

Thanks for the explanation. I've got one of the speedfeed stocks at home, thought maybe I could just slap one of these adapters on it but I see it's more involved than that now haha.

Thanks so much for bringing these to the market though, love anything to do with the 870 mcs. Ordered one of your MCS Pachmyer Vindicator grip setups and really excited for that. I'll have to grab one of these Raptor grips too :)

Your schedule is probably already pretty busy but was wondering if the speedfeed stocks aren't really gonna work out was there a possibility that you may be making a batch of different full length stocks (plain 870 oem stock, magpul sga stock or hogue short lop stock, to name a few) in the near future?
Would be great to have along side with the Raptor or Vindicator grip to complete the package :)
 
No name said:
Thanks for the explanation. I've got one of the speedfeed stocks at home, thought maybe I could just slap one of these adapters on it but I see it's more involved than that now haha.

Thanks so much for bringing these to the market though, love anything to do with the 870 mcs. Ordered one of your MCS Pachmyer Vindicator grip setups and really excited for that. I'll have to grab one of these Raptor grips too :)

Your schedule is probably already pretty busy but was wondering if the speedfeed stocks aren't really gonna work out was there a possibility that you may be making a batch of different full length stocks (plain 870 oem stock, magpul sga stock or hogue short lop stock, to name a few) in the near future?
Would be great to have along side with the Raptor or Vindicator grip to complete the package :)
Click to expand...

so to answer that, this is the plan.

The pachmeyer is done and on the market.
The shockwave raptor is finish up. most are sold already.
next we hope to do a bunch of magpul SGA.
Then its either the mesa tactical Urbino stock or, the Houge short LOP
we are also working on the original M4/AR15 CARBINE STOCK ADAPTOR.

we will likely do these in batches, we are being careful , as things are not looking for great for 2024 and there is a good chance we will have to close our retail store in order to survive.
 
badboybeeson said:
so to answer that, this is the plan.

The pachmeyer is done and on the market.

The shockwave raptor is finish up. most are sold already.

next we hope to do a bunch of magpul SGA.

Then its either the mesa tactical Urbino stock or, the Houge short LOP

we are also working on the original M4/AR15 CARBINE STOCK ADAPTOR.

we will likely do these in batches, we are being careful , as things are not looking for great for 2024 and there is a good chance we will have to close our retail store in order to survive.
Click to expand...

Really sorry to hear you might have to close your retail store, hope it doesn't have to turnout that way. You guys are doing awesome work though.

I see my Pachmayr grip and adapter shipped today and I'll definitely be going after a couple of these stock sets when they're available too.

Thanks again, appreciate the work your putting in on these and bringing them to the market.
 
got my raptor grip ordered the other week, just waiting for the sga magpul (black stock). Hopefully you do a preorder on those aswell.
 
Many people are looking for the MCS forend, including me. The same on the gun from the pictures. Please, if you can make it available.
 
ors said:
Many people are looking for the MCS forend, including me. The same on the gun from the pictures. Please, if you can make it available.
Click to expand...

well it would be something we will mold, as the cost for the injection moulding would be about $100k to start, but we do have a few options we are looking at.
bbb
 
badboybeeson said:
MCS Shockwave Raptor Grip

These are in production and shipping end of this month.
This is a pre order wirh free shipping.
There is around 40 or so out the 100 units we are making
Left avaliable.

We have many project this summer inc other MCS products so this will be the only run of these untill the fall.
**Image and video linking functions will be enabled after you have contributed more to the forum**
View attachment 777200
View attachment 777201
View attachment 777202
Click to expand...

I just noticed in the picture your shotgun's got what looks like your blue line +1 mag extension, with that installed does it give it a few more inches to the overall length to keep it non restricted with the pachmayr grip installed? Or does the measurement have to be from the end of the muzzle to the end of the buttstock?
 
No name said:
I just noticed in the picture your shotgun's got what looks like your blue line +1 mag extension, with that installed does it give it a few more inches to the overall length to keep it non restricted with the pachmayr grip installed? Or does the measurement have to be from the end of the muzzle to the end of the buttstock?
Click to expand...

So to answer that.
It is out blueline magazine so it is a bit longer.
But does not add to overall lenght.
We put that on this gun as a stand off device breaching doors.
 
You must log in or register to reply here.
Back
Top Bottom