MEC 700 shotshell loader problem (NM, fixed it!)

[ninepointer]

My MEC 700 is equipped with a Pro Check. The problem is that when I push the charge bar to the left to drop the powder, the Pro Check does not quite clear the top of the wad guide bracket. It hits the top and has to bump up and ride over. This makes it awfully hard to push the charge bar to the left.
Yes, I have the handle all the way down and the wad guide bracket is as far down as it can possible go. What to do?

 

[ninepointer]

Nevermind. Looks like the previous owner somehow managed to bend the Pro Check. All I had to do was put it in a vice and give it a slight bend back to normal. Its good now.