Mepro M21

Caboose

CGN frequent flyer
Rating - 100%
38   0   0
I just purchased one from a site sponsor. Its the perfect match for my Tavor x95 9mm. I have a couple questions for those that have one...

What colour is your tritium? Owners manual says red/orange, mine is more of a yellow/amber...

Also there is a wiggle between the QR adapter and the M21 base. The front of the sight moves about 1/32" left then springs back. Dealer says this is normal for an M21 so it can absorb recoil. I've never owned a Mepro before, but in my 30+ years of shooting, the optics / RDS are always connected firm to the gun
 
I have an older M21. Tritium is amber. Mine has play in the connection between the sight and base. I found it disconcerting at first, but it does hold a zero, so I'm guessing they know what they were doing!

It's no precision sight, but it is Minute of Figure 11, and gets my rounds on paper at DSSMatch.com events!
 
Thanks for the replies, hopefully I can sight it in tomorrow...

I was running a Vortex Strike Eagle + mount and found it just a tad low...cramped up feeling on the gun. M21 is much better
 
Mine is the bullseye. I like it. If you can find one the WOR washout remover is essential if you shoot from dark (like under a covered firing line) to bright (like the range in the summer sun!!!!).
 
oh I know about that, I wasn't being lazy, just asking if anyone that bought theirs from a place that's a lower/special pricing on it ;) (instead of the usual 600$)

wasnt assuming you were being lazy, just took it as you didn't know which dealers. makes sense now what your asking lol
 
Try the polarizer + flash guard set in place of the WOR
Screws on to the front with no WOR to get snagged or snapped off
I like a bullseye for shotgun and prefer the dot over the triangle
 
Definitely try the factory polarizer kit before going to a battery operated washout unit. The polarizer almost totally eliminates the reticle washout issue when viewing from a dark environment to light.

hsld
 
Back
Top Bottom