So, I thought I'd post a pic of what I decided to do wiwth my 'rinco HP9 for a red dot mount...
After considerations of all the mounts available to me, I went with the Mesa Mount. The friendly folks at Target Sports had it ordered and in their shop in about 3 days. That's pretty good!
Anyways, mounted it and took the shotgun to the range.... Ummm, never bothered to check to see if the action would work... Seems the Mesa Mount is partially in the way of the pump on the left side of the receiver.
Nothing a little dremeling wouldn't fix of course...
Here's a couple of pics of the pump so you can see what I had to do to allow the action to cycle properly.
Right side of rifle, action to the rear.
Left side, you can see where the pump had to be "adjusted" to fit around the saddle.
Not sure if others have done this a different way or not, but, that's how I solved the issue!
After considerations of all the mounts available to me, I went with the Mesa Mount. The friendly folks at Target Sports had it ordered and in their shop in about 3 days. That's pretty good!
Anyways, mounted it and took the shotgun to the range.... Ummm, never bothered to check to see if the action would work... Seems the Mesa Mount is partially in the way of the pump on the left side of the receiver.
Nothing a little dremeling wouldn't fix of course...
Here's a couple of pics of the pump so you can see what I had to do to allow the action to cycle properly.
Right side of rifle, action to the rear.
Left side, you can see where the pump had to be "adjusted" to fit around the saddle.
Not sure if others have done this a different way or not, but, that's how I solved the issue!
