metallic silhouette targets?
- Thread starter majorca
- Start date
- Location
- Eastern Ont.
Not sure where ,
but the back portion of our old club range manuel (NFA?)
it has templates for the clubs to have thier own made.
Just have a shop make them.
but the back portion of our old club range manuel (NFA?)
it has templates for the clubs to have thier own made.
Just have a shop make them.
If you can find a retailer for Champion Targets they make a set of 4 NRA silhouette spinners.the stand that comes with them is a pos but you can build stands out of 2 by 6 lumber.I think i payed around 60 bucks for mine.these are regulation size targets for rimfire rifles.ps google Champion traps& targets they have a dealer locator on there site.
.22 LR doesn't beat things up like a centerfire. I made all of my .22 gongs out of 3/16" thick cold rolled steal. They are welded, but I don't see any reason why they couldn't be screwed together. Metal Supermarket is your friend for these kinds of projects.
silhouette targets
Go to 6mmbr.com. Click on the target download link. There is a set of Silhouette targets that you can download.
You can make up a pattern, and find someone with a torch to cut them out. A plasma cutter is even better. Weld them to a base, and you have a set of targets.
While you are on that site, look at the .22 rimfire tactical link. There are also a variety of targets there. It might be a lot of fun to have a .22 tactical shoot, using these targets.
Also there is a Silhouette shooting association. I think it is IMSA, so you might Google that. They probably have target plans or drawings.
.
Go to 6mmbr.com. Click on the target download link. There is a set of Silhouette targets that you can download.
You can make up a pattern, and find someone with a torch to cut them out. A plasma cutter is even better. Weld them to a base, and you have a set of targets.
While you are on that site, look at the .22 rimfire tactical link. There are also a variety of targets there. It might be a lot of fun to have a .22 tactical shoot, using these targets.
Also there is a Silhouette shooting association. I think it is IMSA, so you might Google that. They probably have target plans or drawings.
.
Canadian_Zuk
CGN Ultra frequent flyer
- Location
- Pickering, Ontario
I'm not too far from you and have a Plasma cutter & welder... I'd be willing to work with you on this if you'd like. PM me if your interested.
You'll get killed on shipping. I looked into this, and ended up designing my own set of swingers. I get them cut locally by a laser shop. I then twist the stems and bend a 1/4" rod to make my frame. I actually just made 2 more sets for people at my club.
I might be able to take some pictures once I get my set back....
