Nothing apparently. I used wrong word. Heard it once used in context of KelTec guns and thought I got the meaning. Pardon my English, it's the fourth language I had to learn in my life.
modern 7.62x39? BCL, kodiak or other??
- Thread starter Rob_man587
- Start date
That's ok, I've learned 4 langiages over my life time aswell and didn't get what yiu were saying
If this current batch of M10Xs turn out to be reliable, they'll basically be better than a T81 in every way: better ergos, easier optic mounting, etc. For now though, their reliability is an unknown. All the other generations were a real roll of the dice. Some people have gen 2s that run reliably but there have certainly been numerous horror stories. Even the ones that run reliably seem to require one specific ammunition to run well. Imo, the only reason to run a 7.62x39 is to run the cheapest surplus ammo possible so a rifle that won't run it is kind of useless. At this point it's easier to just mod a T81 to your liking and know that it will happily chug along regardless of what you feed it.
Type 81 is a Chinese made stamped receiver semi automatic rifle with poor finish, nasty trigger, limited mounting solutions, accuracy like a SKS. But some can shoot around the corner i heard.
TheMidnightNarwhal
Regular
The bar has been dropped in the mud; yet it’s still high enough to trip most Canadian manufacturers
Yet it doesn't negate the drawbacks of the T81 lol.
Last edited:
If youre looking for the BEST option, Dlask has a Bren2 non-restricted conversion in 7.62x39 in stock, plus the complete unmolested factory drop-in barrel....
If I didn't already have one I would have bought it. Pretty sweet with the two complete barrels.
https://dlaskarms.com/product/cz-bren-2-ms-in-7-62x39-caliber-n-r-comes-with-two-barrels/
If I didn't already have one I would have bought it. Pretty sweet with the two complete barrels.
https://dlaskarms.com/product/cz-bren-2-ms-in-7-62x39-caliber-n-r-comes-with-two-barrels/
Last edited:
350 Rounds in with my Gen 3 m10x+. Its been a really fun rifle so far. Besides the initial issue i had regarding the receiver latch (which was fixed in 3 days by CSC) and the 1 stoppage due to an incorrectly pinned mag its ran with zero stoppages for the other 349 rounds!
Accuracy does leave much to be desired tho. I did notice while stripping the rifle and cleaning that the screws that hold the barreled action in place to the receiver were quite loose, resulting in some play. I tightened these up so I am hoping this will improve accuracy a bit. I will be keeping a close eye on them and will put a small dab of blue loctite on should i need to!
Accuracy does leave much to be desired tho. I did notice while stripping the rifle and cleaning that the screws that hold the barreled action in place to the receiver were quite loose, resulting in some play. I tightened these up so I am hoping this will improve accuracy a bit. I will be keeping a close eye on them and will put a small dab of blue loctite on should i need to!
