Modern Sporter - Build Discussions

[odsixer]

You mean 6mmAR?

Yeah, I guess 6.5 Grendel is the parent cartridge? Can you find brass?

 

[greg olmstead]

Yeah, I guess 6.5 Grendel is the parent cartridge? Can you find brass?

You have to make it from 6.5 grendel, 220 russian and 6ppc brass.

 

[Pschilly]

What exactly makes the Triggertech triggers not fit? Or is it just the "adaptable" one that does not fit?

 

[Sput]

I posted this in the wrong topic, I apologize.

 

[ATRS Shaun]

What exactly makes the Triggertech triggers not fit? Or is it just the "adaptable" one that does not fit?

We have a modification that will in all likely hood allow the trigger tech to work, email us at info@albertatacticalrifle.com if you want more information

 

[XLNC]

We have a modification that will in all likely hood allow the trigger tech to work, email us at info@albertatacticalrifle.com if you want more information

Thank you, thats great. just emailed you guys about this as well.

 

[Brian46]

Anyone build a 30 RAR yet on one of these?

 

[JIP911]

Was hoping to run a ELF 3 gun in mine... It's design is similar to the triggertech but not nearly as blocky at the rear. For the guys who have their lowers in hand do you foresee any issues with clearance on the rear lug?

 

[Pschilly]

Got my set today .. did a prelim fit with my triggertech competition trigger... Seems to fit well... Will report back when I get rest of the parts and build it for reals!

 

[Dietz]

Port cover pin hole is a wee bit too shallow.

 

[no-one special]

Port cover pin hole is a wee bit too shallow.

Lemme guess, compared to an AR15? Right? THESE ARE NOT AR15s!!! The port door pin does not go completely through the upper as they do in an AR so the tiny C clip is not required. Your handguard will retain the port door pin just fine. Shorten the pin by about .125" and you are good to go, as the upper was designed.

 

[Dietz]

Lemme guess, compared to an AR15? Right? THESE ARE NOT AR15s!!! The port door pin does not go completely through the upper as they do in an AR so the tiny C clip is not required. Your handguard will retain the port door pin just fine. Shorten the pin by about .125" and you are good to go, as the upper was designed.

Did someone piss in your cornflakes or something?

 

[greg olmstead]

Port cover pin hole is a wee bit too shallow.

Bench grinder fixed mine right up. No clue why it's not deep enough. Oversight maybe?

 

[Kratos]

Bench grinder fixed mine right up. No clue why it's not deep enough. Oversight maybe?

Tap it with a hammer, it’s just tight.

 

[P11]

WHats the deal with safety selectors guys. Any that wont work? Want to use the 90/45 radian talon selectors

 

[greg olmstead]

Tap it with a hammer, it’s just tight.

I tried and not just a tap. No beuno. Milspec pin with clip removed

 

[jiffx2781]

...

 

[d.kurp]

WHats the deal with safety selectors guys. Any that wont work? Want to use the 90/45 radian talon selectors

my radian talon 90/45 works very good as well.

 

[Recce21]

Well my Seekins NXS won't fit without grinding it which I don't want to do UGH

 

[purplezuk]

I tried and not just a tap. No beuno. Milspec pin with clip removed

Greg, I'm in Blackfalds, I have the correct drill bit to make that hole a hair deeper.
Send me a pm or msg me on Facebook